Can someone tell me how to get Beefmanns 900watt heater mod post with the pictures pulled up? Also if someone has did this mod lately, where do you get the heater and fan, or do you need the fan?
Thanks in advance!
Is this the link you were talking about?
http://forum.bradleysmoker.com/index.php?topic=6918.0 (http://forum.bradleysmoker.com/index.php?topic=6918.0)
I think the fan was needed to keep the heating element from burning out and also to help with the convection heat principle.
That's it, thanks
I did this mod and used a small fan, and I burned up 2 heaters so I went and did the double stock element instead and that seems to be working fine, not discouraging you but like it says you need to keep a lot of air moving over the 900 watt finned heater.
LTS
Thanks LTS, is there a link to get that mod done, I need to do something and would like to order the parts soon!
Have you seen the modification of adding a second element that give you 1000 watts of power? With this setup you don't have to worry about adding a fan. You can always add a fan latter for better heat circulation.
Additional Heating Element (http://www.susanminor.org/forums/forumdisplay.php?27-Bradley-Accessories)
Thanks H.S., ordered the parts today from yard and pool, can't wait to tear the old girl apart!
Will probably need some help when it comes time to operate!
It's an easy modification, just let us know if you need assistance.
Here are some helpful links for wiring.
Here is a link for hot temperature 14 gauge wire: (http://www.alliedkenco.com/catalog/product_info.php/products_id/773)
Link to terminal rings: (http://www.alliedkenco.com/catalog/product_info.php/products_id/776)
Link to terminal push: (http://www.alliedkenco.com/catalog/product_info.php/products_id/777)