I'm getting a flashing E and constant beep from the oven side, can't set temperature or run it. Any ideas what's wrong?
Try unplugging the all the cables and plugging them back in firmly, I believe its the small one thats causing your problem.. may have got moved slightly.
Thank you! I appreciate your help.
I did find the problem, and of course feel stupid. I had left some bisquettes in the wood chamber, and I think the bottom one was probably partly cooked and therefore misshapen, and it jammed the puck feed. I cleared it and the controller lit up normally. A novice problem, which is good, since I'm new at this!
Thanks again,
Russ Sikes
Plano, Texas
Quick and simple Fix. Welcome to the Forum.
Quote from: RussSikes on February 18, 2017, 02:19:10 PM
Thank you! I appreciate your help.
I did find the problem, and of course feel stupid. I had left some bisquettes in the wood chamber, and I think the bottom one was probably partly cooked and therefore misshapen, and it jammed the puck feed. I cleared it and the controller lit up normally. A novice problem, which is good, since I'm new at this!
Thanks again,
Russ Sikes
Plano, Texas
Glad your up and running Russ! Welcome to the forum btw.
Johnny.
Welcome to the forum Russ
Welcome to the forum