Hello all. HELP- Doesn't work out of the box please help!

Started by MOONDOG, December 06, 2009, 07:12:01 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

MOONDOG

I just unpacked and put the 6 rack digital together with great anticipation.  Only to find out when I power on all I get is a constant peep-peep and on the display I see error's1 does any one know how to reset this thing?  I tried multiple times to restart, unplug ed, also took the fuse out and powered again with the same results.  Following the seasoning method instructions with no success >:(  The timer setting and up and down arrows do nothing.  Someone pleas advise

>:(

Hopefull Romantic

Hi Moondog and welcome to the forum.

Please check you packing again. There should be a thin sensor wire that should connect the smoke generator to the tower. Plug that in both and the E1 error should go away.

HR
I am not as "think" as you "drunk" I am.

KyNola

You may have to plug and unplug the sensor wire several times that HR referred to in order to get the connection.  Reverse ends and try it again if the connection is still not made.

KyNola

MOONDOG

KyNola--thank you so very much checked the sensor and now it is working.  Your the best ;)

FLBentRider

Click on the Ribs for Our Time tested and Proven Recipes!

Original Bradley Smoker with Dual probe PID
2 x Bradley Propane Smokers
MAK 2 Star General
BBQ Evangelist!

KyNola

My pleasure MoonDog.  We've all had to go through that before.  Another hint, keep that vent open.  Don't shut it down.  Contrary to what would seem logical, shutting the vent down, particularly while smoking will actually decrease the box temp.  Mine is always at least 50% open unless I'm doing poultry.  Then it's 100% open as poultry has a LOT of moisture and moisture is the enemy of a Bradley.

KyNola

classicrockgriller

MOONDOG, congrats on your Bradley and looking forward to seeing some great things in your smokes.

here are a cpl links that might help.

recipe site: http://www.susanminor.org/forums/

FAQ
http://www.susanminor.org/forums/showthread.php?t=481

Try this link to get your pictures going.

http://www.susanminor.org/forums/showpost.php?p=768&postcount=11

MPTubbs

Welcome aboard Moondog!
Just set mine up and it worked right out of the box. I'm seasoning it as we speak.
Did some reading here and I made sure all wires were connected good before firing it up.
Have fun I know I will.
If your so cool....where's your Tattoo.

OU812

Welcome to the fun MOONDOG

Glad to here you got your new tool up and running.

Watch out this kinda smoking is very addictive.