Bad ET-73 probe?

Started by TTNuge, February 20, 2010, 02:52:04 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

TTNuge

Well today I used my ET-73 for about the 10th time and after the jerky was in for about an hour I look a look at my ET-73 to find my cabinet temp was at about 385 degrees.  Quick check of my Auber as well as the thermo in door of the OBS confirmed that I was only at 130 like I had it set.  I then dropped the meat probe for the ET-73 in the cabinet and it too read 130 degrees so at least everything was spot on. 

But unfortunately it looks like the cabinet temp probe has gone south.  I took it out of the smoker and let it sit in the 30 degree garage and we're still reading about 285 degrees.  Any other type of reset or anything I should try first?  Looks like $12 for a replacement probe which isn't too bad.  Just unfortunate it happened so quickly.


KevinG

There's a couple of things you can try, but if the TC is bad, there's no fixing it. I'd try disconnecting and re-connecting, then re-establish the communication link. If it got wet for any reason, it's most likely gone, but you can try to let it dry out and see if it comes back to life.
Rodney Dangerfield got his material from watching me.
Learn to hunt deer www.lulu.com/mediabyKevinG

TTNuge

I bet it was moisture.  It happened after I was adjusting my exhaust ducting and I accidentally bumped my vent and had it more than half closed.  Didn't notice it until I noticed the temp issue and there was a lot of moisture build up in and around the OBS.  My guess is that since I had the probe running down through the vent that the condensation collected, ran down the wire and into the probe killing it.

Live and learn.  Guess I'll order a 2 pack so I have a spare.

classicrockgriller

That is one of the reasons I don't run my probes down the vent.

Also clean them after your smoke so they have time to dry before next use.

I use an alcohol based wipe so that it evaporates quick and sanitizes.

Captainslug

Quote from: classicrockgriller on February 20, 2010, 09:35:28 PM
That is one of the reasons I don't run my probes down the vent.

Also clean them after your smoke so they have time to dry before next use.

I use an alcohol based wipe so that it evaporates quick and sanitizes.

Hey Classic,  How do you  run your probes then? 
Bradley Digital 4 Rack Smoker, 8 Std Racks, cold smoke adapter, 3 alum. pucks, 2nd element, circ. fan, Dual probe PID

Tenpoint5

Quote from: Captainslug on March 04, 2010, 12:10:37 PM
Quote from: classicrockgriller on February 20, 2010, 09:35:28 PM
That is one of the reasons I don't run my probes down the vent.

Also clean them after your smoke so they have time to dry before next use.

I use an alcohol based wipe so that it evaporates quick and sanitizes.

Hey Classic,  How do you  run your probes then? 
In thru the door
Bacon is the Crack Cocaine of the Food World.

Be careful about calling yourself and EXPERT! An ex is a has-been, and a spurt is a drip under pressure!

Captainslug

Quote from: Tenpoint5 on March 04, 2010, 12:29:47 PM
Quote from: Captainslug on March 04, 2010, 12:10:37 PM
Quote from: classicrockgriller on February 20, 2010, 09:35:28 PM
That is one of the reasons I don't run my probes down the vent.

Also clean them after your smoke so they have time to dry before next use.

I use an alcohol based wipe so that it evaporates quick and sanitizes.

Hey Classic,  How do you  run your probes then? 
In thru the door

Any wear and tear showing on the door seals?
Bradley Digital 4 Rack Smoker, 8 Std Racks, cold smoke adapter, 3 alum. pucks, 2nd element, circ. fan, Dual probe PID

TTNuge

Since this thread came back up it made me pick up the phone and call Maverick.  I was very nice, telling them how much I love my ET-73 and told the sweet gal answering the phone about my problem and she said it would be no problem to send me out a new probe.  She took my address and phone number and said it would be on its way.

Gotta love it.

Tenpoint5

Quote from: Captainslug on March 04, 2010, 12:31:31 PM
Quote from: Tenpoint5 on March 04, 2010, 12:29:47 PM
Quote from: Captainslug on March 04, 2010, 12:10:37 PM
Quote from: classicrockgriller on February 20, 2010, 09:35:28 PM
That is one of the reasons I don't run my probes down the vent.

Also clean them after your smoke so they have time to dry before next use.

I use an alcohol based wipe so that it evaporates quick and sanitizes.

Hey Classic,  How do you  run your probes then? 
In thru the door

Any wear and tear showing on the door seals?
None yet. But then I run the probes both ways in the door down the vent. just depends on what I feel like doing at the moment. I do have the six foot replacement probe though. I sent mine swiming one day and it rebelled.
Bacon is the Crack Cocaine of the Food World.

Be careful about calling yourself and EXPERT! An ex is a has-been, and a spurt is a drip under pressure!