Dual Probe PID Help

Started by VI_Smoker, June 06, 2010, 07:38:13 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

VI_Smoker

Hi,
I'm using a dual probe Auber PID for the first time and have a question.  When should the Smoker Generator turn on? Both the R1 and R2 parameters are set to 1 but the SG is off.  I have checked the connections and everything is connected correctly and the PID is controlling the cabinet.

BuyLowSellHigh

Don't take this the wrong way but, are you sure the SG is switched on ?  If so, check the SG power output of the Auber.
I like animals, they taste good!

Visit the Recipe site here

VI_Smoker

Hi BLSH,
yes the SG power is on, the sg light on the pid is off and the sg switch light is also off, i.e. it looks like the pid is not sending power to the sg.

VI_Smoker

So it turns out the problem was the power cord  - I went out and got a 12 guage cord and the problem is resolved.

Thanks

TestRocket

Current draw... thanks for posting the solution!