Author Topic: Jerky Cannon  (Read 2054 times)

Offline jaeger

  • Sr. Member
  • ****
  • Posts: 735
Jerky Cannon
« on: January 29, 2006, 10:01:37 pm »
Here is a picture of the attachment I made for my stuffer. I wanted to make a "flatter" type of chopped and formed jerky. I have a jerky cannon but it is a pain. This attachment on the stuffer worked nice. I used a 6inch piece of 3/4 copper tubing flattened a bit in the vise with the opposite end fitting over the medium size stuffing horn. I attached with a stainless hose clamp.
With this set up the meat stuffed much easier, I didn't have to add any water, and I only had to fill the canister once. I think the stuffer is just as easy to clean as the cannon also.
Here are a couple of pics.

http://img.photobucket.com/albums/v244/xcelsmoke/Horn.jpg

<font color="red"><font size="4">Are they done yet![;)]</font id="size4"></font id="red">

http://img.photobucket.com/albums/v244/xcelsmoke/Stx.jpg

http://img.photobucket.com/albums/v244/xcelsmoke/Formed.jpg





<font size="4"><b>Doug</b></font id="size4">