Repair temperature probe

Started by 40-Dan, May 31, 2012, 06:47:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

40-Dan

The plug (that goes into the back of the Auber) on my cabinet mounted probe has broken.  It looks like just a standard 3.5mm plug - is that the right size?  Can I fix it with a $3.00 part from Radio Shack as opposed to buying a $25.00 replacement probe from Auber?

mikecorn.1

#1
Email Suyi at auberins to get the exact answer. I had mine go out on my 2 probe plug and play and he sent a new one.


Sent from my iPhone using Tapatalk
Mike

viper125

I think the resistance would change. Wouldnt read correctly then.

Sent from my DROIDX using Tapatalk 2
A few pics from smokes....
http://photobucket.com/smokinpics
Inside setup.

40-Dan

From the horse's mouth.  Posted here in case anyone else ever has the same problem.

Hello Dan,

Yes, you can solder a new plug yourself. The probe doesn't need to be replaced if it is working.

Suyi Liu
Auber Instruments

mikecorn.1

Quote from: 40-Dan on June 01, 2012, 07:21:13 AM
From the horse's mouth.  Posted here in case anyone else ever has the same problem.

Hello Dan,

Yes, you can solder a new plug yourself. The probe doesn't need to be replaced if it is working.

Suyi Liu
Auber Instruments
Yep, that's the answer he needed. When he sent me a new one it was because the actual probe was bad.


Sent from my iPhone using Tapatalk
Mike

viper125

Great to know. Must of been the maverick that told me that.
A few pics from smokes....
http://photobucket.com/smokinpics
Inside setup.