Bookmarks 1 Bookmarks

Author Topic: How do I plug the 611 into a Duel Probe AUBER PID  (Read 1705 times)

Offline jburdt

  • Newbie
  • *
  • Posts: 15
How do I plug the 611 into a Duel Probe AUBER PID
« on: April 07, 2013, 02:33:51 pm »
Do I connect the smoker directly to the Auber PID or do I still Plug it into the SG and just plug the power cord from the SG into the PID?  Also do I need to put the temp setting on the SG to the highest lever or where do I set it to? Also I noticed somewhere that this unit turns off after 9:40 is this true? Also what I am trying to do is set up for overnight smokes to keep the same inside temp all night even though the outside temp may have big swings, so if I just want it to stay at one temp for the entire smoke do I still need to program all 6 cycles or what is the correct setting if I just for example wanted to keep the cabinet temp at 225 until the meat reached 200. Any help would be great.
Thanks
« Last Edit: April 07, 2013, 02:58:22 pm by jburdt »

beefmann

  • Guest
Re: How do I plug the 611 into a Duel Probe AUBER PID
« Reply #1 on: April 07, 2013, 03:15:33 pm »
it should be labled on the back... if not , plug the tower into the auber pid and smoke generator into a  separate full time power outlet the pid then will controll the  temp of the box for you
 

Offline jburdt

  • Newbie
  • *
  • Posts: 15
Re: How do I plug the 611 into a Duel Probe AUBER PID
« Reply #2 on: April 07, 2013, 03:35:24 pm »
That makes sense since I only need it to control heat and not the sg. Thanks