adding pid to the new obs

[kirky2126]

I'm looking to add a pid to my new OBS with the turn dial i wants to put it in the smoke generator  for a neat clean install all the links to instructions on susanminor.org dont work anymore .All help will be appreciated

[Habanero Smoker]

Hi;

Welcome to the forum.

One member posted how he did the mods on his. I'm not sure how detailed the instructions are.

http://forum.bradleysmoker.com/index.php?topic=33649.msg392032#msg392032
 

[TedEbear]

There still is an archived version of the recipe site.  I don't know why others are reluctant to post it but here is a link to the section that pertains to adding a PID controller to the smoke generator.  The links may eventually go dead some year but they are still alive and well right now. There might be a few pics missing in that link but if you need them I can post where to d/l the entire recipe file, which includes every pic of every mod that was on the Susan Minor site.

PID Controller

I followed that how-to and added one to my OBS about 5 years ago.





Edit:  OK, here's the link to d/l the entire Susan Minor recipe file.  It will have the rest of the pics in that how-to for installing a PID controller in the SG.  You'll need the Recipe_v5 file and the GSReader v2.8, which you can find in that thread.

Recipe File

[kirky2126]

i down loaded the links but no files showes up in GSreader

[Habanero Smoker]

If you have the New Bradley Original Smoker, you may be better off referring to the link I provided.

i down loaded the links but no files showes up in GSreader

If you downloaded the GS Reader and recipe file; and installed everything in the default directories, when you open GS Reader, go to "File"; click on "New". A window should open and list all the .gso files; select "Recipe.......".

[RedJada]

I'm using a Mac and this link works for me. It has everything, hope this helps.

https://web.archive.org/web/20141214092757/http://www.susanminor.org/forums/

[RedJada]

 Dont look like that one is working for me. But I can get the recipe portion to work.

https://web.archive.org/web/20150915111431/http://www.susanminor.org/forums/forumdisplay.php?180-Our-Time-Tested-and-Proven-Recipes

[Rider14]

the Auberin PID is a plug and play external PID that runs the original bradley smoker to perfection, although it is a but complicated to program the first time...

[kirky2126]

The plug and play would cost me almost $400 with the exchange rate to canada and shipping . So I'm doing the diy with the auber controller

[TedEbear]

the Auberin PID is a plug and play external PID that runs the original bradley smoker to perfection, although it is a but complicated to program the first time...

Auberin sells several versions of a PID. The internal one that the OP wants to install is around $45 and total cost for everything to make it work is around $70-$80.

[kirky2126]

I bought the auber : SYL-2352 it cost me $80 (can.) with exchange and duties . I originally ordered a cheaper brand on eBay but reading all the post on here I changed my mind and went with the auber controller