Flashing "E" (error) and beep on Oven side

Started by RussSikes, February 18, 2017, 01:43:18 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

RussSikes

I'm getting a flashing E and constant beep from the oven side, can't set temperature or run it.  Any ideas what's wrong?

Johnny

Try unplugging the all the cables and plugging them back in firmly, I believe its the small one thats causing your problem.. may have got moved slightly. 

RussSikes

Thank you!  I appreciate your help. 

I did find the problem, and of course feel stupid.  I had left some bisquettes in the wood chamber, and I think the bottom one was probably partly cooked and therefore misshapen, and it jammed the puck feed.  I cleared it and the controller lit up normally.  A novice problem, which is good, since I'm new at this!

Thanks again,
Russ Sikes
Plano, Texas

Edward176


Johnny

Quote from: RussSikes on February 18, 2017, 02:19:10 PM
Thank you!  I appreciate your help. 

I did find the problem, and of course feel stupid.  I had left some bisquettes in the wood chamber, and I think the bottom one was probably partly cooked and therefore misshapen, and it jammed the puck feed.  I cleared it and the controller lit up normally.  A novice problem, which is good, since I'm new at this!

Thanks again,
Russ Sikes
Plano, Texas

Glad your up and running Russ! Welcome to the forum btw.
Johnny.

Smoker John

Bradley Digital 4 Rack
Bradley BS712

cherrybergher

BDS 4 Rack
"Improving the flavour of our lives one smokey day at a time"