Author Topic: Fuse problem  (Read 1298 times)

Offline jrb1003

  • Newbie
  • *
  • Posts: 4
Fuse problem
« on: May 13, 2017, 07:06:12 AM »
Please advise what to do when fuse in back of generator keep blowing out I have replaced it four occasions and each time I connect to power source it blows out again. Thank.

Offline Habanero Smoker

  • Member Extraordinaire
  • ******
  • Posts: 14,739
  • KCBS - Master Certified Barbecue Judge
Re: Fuse problem
« Reply #1 on: May 13, 2017, 01:17:08 PM »
If it keeps blowing you have an electrical problem. If you are still under warranty contact Bradley. To troubleshoot some, unplug the cabinet, then turn on the generator. If the fuse still blows the problem is in the generator. If the fuse doesn't blow the problem in with the cabinet.

If you are running 110v, you should be using a 10amp fuse.