Author Topic: FUSE size for original bradley smoke generator  (Read 5440 times)

Offline 72jimbo

  • Newbie
  • *
  • Posts: 2
FUSE size for original bradley smoke generator
« on: December 02, 2007, 01:23:38 pm »
Great site everyone. My smoke generator is on the fritz. The fuse actually crumpled when I took it out. I cannot read the size on the end of it. What size does the smoke generator need? Thanks

Offline Wildcat

  • Member Extraordinaire
  • ******
  • Posts: 4,848
Re: FUSE size for original bradley smoke generator
« Reply #1 on: December 02, 2007, 01:40:34 pm »
I believe it is a 25 watt - 10 amp.
Life is short. Smile while you still have teeth.



CLICK HERE for Recipe Site:  http://www.susanminor.org/

Offline Arcs_n_Sparks

  • Hero Member
  • *****
  • Posts: 1,294
Re: FUSE size for original bradley smoke generator
« Reply #2 on: December 02, 2007, 01:51:41 pm »
It is a 250 V, 10 amp 3AG-style fuse. Surprising that it would come apart on you.

Arcs_n_Sparks

Offline Wildcat

  • Member Extraordinaire
  • ******
  • Posts: 4,848
Re: FUSE size for original bradley smoke generator
« Reply #3 on: December 02, 2007, 01:54:06 pm »
It is a 250 V, 10 amp 3AG-style fuse. Surprising that it would come apart on you.

Arcs_n_Sparks

Opps.  Left off the 0 on 250V.  Thanks sparky.
Life is short. Smile while you still have teeth.



CLICK HERE for Recipe Site:  http://www.susanminor.org/

Offline 72jimbo

  • Newbie
  • *
  • Posts: 2
Re: FUSE size for original bradley smoke generator
« Reply #4 on: December 02, 2007, 02:06:20 pm »
Thanks fellas. I'll run to the store tomorrow. Hope it fixes it.

Offline Gizmo

  • Member Extraordinaire
  • ******
  • Posts: 3,922
Re: FUSE size for original bradley smoke generator
« Reply #5 on: December 02, 2007, 08:50:13 pm »
You may want to open the box and look at the wiring that was connected to the fuse holder as well.  There have beeen a few folks here that experienced the wiring frying on the fuse holder and had to do a little repair there as well.
Click here for our time proven and tested recipes - http://www.susanminor.org/

Offline West Coast Kansan

  • Member Extraordinaire
  • ******
  • Posts: 2,093
Re: FUSE size for original bradley smoke generator
« Reply #6 on: December 02, 2007, 08:54:41 pm »
As Gizmo says, I would have a peek inside before trip to the store especially if one end of the fuse has black plastic stuck to it.  You will need an inline fuse holder or you can call Bradley and they will send you a new generator.

Click On Link For Our Time Tested And Proven Recipes and Register at this site for Tuesday Night Chat Room Chat is FUN!

NOW THAT'S A SMOKED OYSTER (and some scallops)

Offline iceman

  • Member Extraordinaire
  • ******
  • Posts: 4,661
  • 9 out of 10 people like BBQ. The 10th person lied!
Re: FUSE size for original bradley smoke generator
« Reply #7 on: December 03, 2007, 12:30:42 pm »
Yep, what these fellers said 72jimbo. Always a good idea to check the wires just in case they got a bit to warm. I've had to fix the wiring in a couple of generators due to melted wiring and by all means call Bradley. They have been real good to deal with.