How to Put Together the Little Silver Bowl with the Black Oval Vent Piece?

Started by Zamora, April 19, 2024, 02:11:24 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Zamora

Just got my P10 in the mail. A little light on the directions. I am utterly bewildered as to the proper placement of a little silver bowl (about 4 inches in diameter) and a black metal oval adorned with vent slots. geometry dash breeze

Habanero Smoker

Hi Zamora;

Welcome to the forum.

Those pieces are confusing if there are no clear directions. In your manual, there is an internal components  diagram that shows the location of both items.

First, that small bowl is called the condensation bowl. That is to catch any condensation that builds up around the vent from dripping on your food. This is called "Black Rain". After assembling the inside cabinet components, you should have assembled a wire rack that runs horizontally across the top or the rack support. That bowl goes in a slot of that wire rack, just under the vent opening. In my manual, it is shown on page 9, and it is identified as number 7 in the diagram.

The black oval piece, is called the "Smoke Diffuser". You will find it on that same page, and it is identified as number 3.

If you have any further questions, please feel free to ask.



     I
         don't
                   inhale.
  ::)