Does anybody who already has a smoke generator know if the short smoke diffuser tube can be taken off, and a fabricated longer one put on? I have a 4 foot wide cabinet, and the best place to mount it will be on the end. I'm affraid the smoke will go up and out before getting to the goods on the far side of the cabinet. Its not very deep, less than 2 foot, but I was hoping to get a smoke diffuser to go the length of the cabinet with bigger holes toward the far end. What material would you use for such a thing? The drip pans will still go above the generator, but there will be gaps of 2 inches between the walls and the pans and between the pans in the middle of the cabinet where the dividing studs are.
Or, do you think the smoke will still get dispersed good enough with factory harware? Thanks!
Hi Patience
I can't really comment from experience and hopefully Iceman will be along and privide his expertise.
Having said that my thought is, if you have some form of circulation fan to keep the heat more even in the cabinet, it would also keep the smoke from the generator more evenly distributed. This is what I'm doing on my current build. It might also help if you could post a picture or two of your setup.
Mike
Pat,
you may want to look into a air condition or vent duct in like a 3 or 4 inch size cap one end and drill holes in the duct where needed. I do know there made in solid steel 22 gage ( i believe ) just get a stright piece and cut it to length with about 2 to 3 inches to insert where the smoke generator enters the box and to the far end.
if you do this mod.. i would recomend that you mount the smoke generator and duck as far as back as you could... you may want to use a Tee where the smoke generator enters the box for the pucks drop off the generator.
the reason for mounting it in the back is to allow for a drip tray to capture your drippings and letting them fall towards the middle and into a catch pan..
also you may want to think on venting as well in the ventalation aare of your local hardware store they have some items that allows you to go through the wall and some are adjustable by opening and closing a damper inside of a duct this way your not loosing all of your smoke and heat
good luck and have fun
Beefmann