Print Page - how to make a PID??

Title: how to make a PID??
Post by: tturaider on August 12, 2007, 01:57:50 PM

Hello All

I know that this has been on here before but i cant find the instructions or supplies that are needed to set up a PID. Can anyone please send me to the right place or tell me how and what I need.

Thanks
tturaider

Title: Re: how to make a PID??
Post by: Fair-chase on August 12, 2007, 02:08:51 PM

I jusy built mine using robs directions. Pretty straight forward. Heres the link http://www.susamminor.org/forumsshowthread.php?t=315.

Good luck, you will like your pid.

Title: Re: how to make a PID??
Post by: tturaider on August 12, 2007, 02:17:05 PM

thanks fair

thats what i am looking for except that i cant get the link to open up? ???

tturaider

Title: Re: how to make a PID??
Post by: dick621 on August 12, 2007, 02:48:42 PM

you might try re typing it and make it susanminer instead of susamminer. I think its just a typo. Dick621

Title: Re: how to make a PID??
Post by: tturaider on August 12, 2007, 04:39:15 PM

Thanks to both of yall

I finally got there and am in the process of trying to figure out what the heck they are exactly talking about.

thanks again
tturaider ;D

Title: Re: how to make a PID??
Post by: Tiny Tim on August 13, 2007, 07:33:07 AM

Read it a few times, it'll all make sense all of a sudden. Might need to have the pieces in front of you too. One suggestion I have, and it was suggested to me before I built mine, is to get an Omega Thermocouple instead of using the Auber one. The Omega's are available on Ebay from a user by the handle of "kulast", or something close to that. I got a (K) 3/16X6" probe with 8' leads (actually a pair of them) for $17.50 (plus shipping) going this route, compared to $30.00 plus shipping for one through Omega.

Title: Re: how to make a PID??
Post by: NePaSmoKer on August 18, 2007, 03:51:11 PM

Its really easy to make, you should have ningún problemo

nepas

BRADLEY SMOKER | "Taste the Great Outdoors"

Bradley Smokers => The Black Bradley Smoker (BTIS1) => Topic started by: tturaider on August 12, 2007, 01:57:50 PM