Print Page - Trouble with auber pid plug and play

Title: Trouble with auber pid plug and play
Post by: Revrob220 on September 20, 2009, 02:09:43 PM

I dont know if I got dumb but I am having problems with hooking up my pid keeps shutting off the smoke generator could someone pleas post a photo of hoe it is hooked up or simple instructions

Title: Re: Trouble with auber pid plug and play
Post by: Hopefull Romantic on September 20, 2009, 02:13:07 PM

Hey Revrob220,

in lahman's term;

1- the smoke generator input goes to the wall socket.
2- the PID goes into the smoke generator output.
3- the PID output goes to the tower input.
4- the PID senson into the tower's vent.

HR

Title: Re: Trouble with auber pid plug and play
Post by: NePaSmoKer on September 20, 2009, 02:15:28 PM

HR

Gots u on the right track.

nepas

Title: Re: Trouble with auber pid plug and play
Post by: Revrob220 on September 20, 2009, 02:24:35 PM

Thanks a lot hopefull I have hooked up before but just could not figure it out today thanks have to do 35 lbs of salmon today and didn't want to have to babysit the Bradley .

Title: Re: Trouble with auber pid plug and play
Post by: Hopefull Romantic on September 20, 2009, 02:28:56 PM

You are most welcome and this is about the friendliest forum there is when it comes to human (not only smoking) interaction. There are many good folks here who would bend over backwards to assist. All you gotta do is ask.

Welcome.

Hr

BRADLEY SMOKER | "Taste the Great Outdoors"

Miscellaneous Topics => Feedback and Help => Topic started by: Revrob220 on September 20, 2009, 02:09:43 PM