Hi,
I Bradley sent me a new front panel because the plastic was cracking. I pulled the old one off and plugged all the connections together and now when I plug it into the outlet the power indicator light comes on no matter which position I have the slider in and I the heating element is not heating. What am I doing wrong? Please help.
Thanks,
Greg
Wish I could tell something simple as a fix, but I can't.
Sounds like a wire is not in the right place.
If it will help, I will take some pics of mine so you can see if you are wired up right.
Hey Classicrockgriller,
if it wouldn't be too much trouble that would help a lot. I figured I had my wires crossed somewhere. Just haven't been able to get the right combination down.
THanks,
Greg
Here is a link to the wiring. Click on the first picture to enlarge it.
OBS Temperature Control Wiring (http://www.susanminor.org/forums/showthread.php?578-Additional-Heating-Element-for-OBS-with-On-Off-Control)
The double wire goes to the vertical terminal post, and the single wire goes to the horizontal terminal post.
PS
I made a similiar mistake some time ago, now I take a picture of the wiring prior to disconnecting the wires, and I also draw a diagram.
Thanks Habs. You have all them neat links in your bag.
Hi Habs,
Thanks for the link. I had the leads plugged in exactly the way the are shown and I even tried reattaching them. I am still having the same problem. I don't know what it could be. I'm not really electrically inclined. Any ideas?
Greg
Best thing now Chaostrophy(love that name by the way) is to give Bradley a call on monday and talk to Brian, he will have you check things out and nail down your problem.
That's odd that the indicator light would work and not the element. It must be a faulty circuit board.
CRG;
I posted that picture some time ago, so I knew exactly were it was located.
Yeah, I hoping top take care of it without having to call Bradley. Fortunately I was cold smoking this past weekend and didn't need the heating element to be working. I'll give them a call whe I get home from work and will report back when we figure out what the problem is.
Thanks for your help.
Definately let us know what the problem is, and the fix.
Here is a PIC I took of mine.
(http://i785.photobucket.com/albums/yy139/TestRocket/Bradley%20Smoker/5-OBSFrontPanelTempControlWiringpre.jpg)
TestRocket, thanks for posting the pic. That's exactly how mine is set up.
But I spoke with the folks at Bradley this evening and they think that the problem was caused by the heating element shorting out, which caused the slider to short out as well. At any rate they are sending me both a new heating element and a new front control panel. I really must say the customer service for Bradley is fantastic. I am glad to see that they stand behind their products. Excellent work.
Greg
I'm glad it helped and Yep! Bradley will take care of you. I hope your back smoking soon!
Well, I received all the parts in the mail on Friday and installed them this morning. I still have the same problem. I will be calling Bradley again tomorrow afternoon. Hopefully we can figure this thing out.
Geez! Sorry to hear this. Brian won't stop helping till you are up and running.
I would be interested in knowing what the problem was, and the fix.
I'll keep you guys posted on the results.