i have the orginal bradley smoker. i have the smoke generator opened up. how do you get the briskett advance button out in order to file it down??
any comments or help thank you very much
the button is getting jammed thats why i'm in there playing around. thank you
Hi Jack & Coke
First make mine a double please
now onto the button
there should be some clear glue or silicone on the inside of the button
remove that glue then squeeze either the top and bottom of the switch or the left and right side
and push it out of the metal
You want to file the metal down on the same side as the two tabs
Just dont file to much all it needs is one or two strokes with the file.
You can see the the tabs you have to squezze in this picture
(http://i47.photobucket.com/albums/f171/1smokie43/Advance%20Buttons/IMG_0901.jpg)
Jack and Coke,
why does that name sound so good . . . and I'm a good friend of Jim also.
I filed mine as noted above, and he's right, it only takes a file stroke or 2. Go slow, and check it after every file stroke. If you go too far, wrap electrical tape around the switch sides to help build it back up. I've got proof it works :o
Good luck
drano
Quote from: drano on January 04, 2011, 08:37:51 PM
Jack and Coke,
why does that name sound so good . . . and I'm a good friend of Jim also.
I filed mine as noted above, and he's right, it only takes a file stroke or 2. Go slow, and check it after every file stroke. If you go too far, wrap electrical tape around the switch sides to help build it back up. I've got proof it works :o
Good luck
drano
Jack and Dr Pepper aka "Pepper Jacks" ....... awesome!
you guys are sick.
thanks so much. it worked. button don't jam anymore.
thank you
Glad you got it worked out!
I was a Jack and 7 guy years ago and gave up the 7up because of the calories. I found over ice is better for your figure! ;D
Good advice! I had the same problem with my new smoker, and this seemed to do the trick.
Smokin in Alberta.
I drink my Jack straight...and Jim too...
ghost9, you and I can go shooting and drinking any day! ;D