BRADLEY SMOKER | "Taste the Great Outdoors"

Bradley Smokers => The Black Bradley Smoker (BTIS1) => Topic started by: greg250 on March 07, 2011, 03:54:18 PM

Title: Biscuit question
Post by: greg250 on March 07, 2011, 03:54:18 PM
Ok stupid question I just bought a obs not sure if its workin right or if its just me .say I want an hours worth of smoke 3 pucks do I have to load more than that to help push them through
Title: Re: Biscuit question
Post by: dman4505 on March 07, 2011, 04:12:02 PM
add two extra to get that last one on the burner

Don
Title: Re: Biscuit question
Post by: SiFumar on March 07, 2011, 04:42:09 PM
I bought bubba pucks from Yard and Pool.  They really help push the pucks and you don't waste pucks buy partially burning them.
Title: Re: Biscuit question
Post by: greg250 on March 07, 2011, 05:16:30 PM
Thanks guys ordering the pucks now
Title: Re: Biscuit question
Post by: bears fan on March 07, 2011, 07:00:27 PM
You can save yourself a bit by just ordering 2 bubba pucks and then placing a regular puck on top of the two bubba pucks.
Title: Re: Biscuit question
Post by: TedEbear on March 08, 2011, 09:52:06 AM
Or save even more by getting some scrap 2-inch thick wall pipe and cutting your own pucks.  They don't have to be solid all the way through.  Mine work great.  Bevel the edges a bit so they slide easier.
Title: Re: Biscuit question
Post by: beefmann on March 08, 2011, 09:59:00 AM
i use 3 - 2 inch copper end caps that were cut down to size and washed and have no problems, just wash after each use
Title: Re: Biscuit question
Post by: bears fan on March 09, 2011, 06:31:45 PM
well where you guys at a year ago when I bought mine :'(.....good ideas
Title: Re: Biscuit question
Post by: broken on March 10, 2011, 05:07:14 PM
some thing else I used was a 1 1/2" to 2" hose clamp turned inside out and wrapped heavily in foil  ::)