BRADLEY SMOKER | "Taste the Great Outdoors"

Recipe Discussions => Meat => Topic started by: Jsouthco on July 03, 2011, 06:17:20 PM

Title: First attempt at a multiple smoke!
Post by: Jsouthco on July 03, 2011, 06:17:20 PM
Hi All,

Well I'm venturing into the realms of multiple Butts and a Brisket next weekend and just wanted to get some advice on ballpark timings. I need to have everything ready for a 4.00pm start on Saturday afternoon so here's what I am thinking:


So here's my dilemma, when do I need to start these going in the 4 rack DBS? Each of the butts is around 6lb (x3) and the brisket is 8lbs so a total of 26lbs of meat. should I be calculating this as 26lbs x 1 1/2 hrs (working on 1 1/2 per lb of meat as an average) which equals a total cook time of 39 hours! or can I start them around midday on Friday and work on 24-26 hours for the lot? I appreciate that each piece of meat will be different so I'm just after some advice from the experts.

Second question - would you put the Brisket on the bottom shelf below the pork or on the top shelf above the pork?


Any advice on when I should start this batch of bad boys going would be appreciated.

P.S. - like all us Brits who enjoy our smoking I am still amazed at the cost of Butts and Brisket in the UK - Those 3 butts (3 x 6lb er's) and Brisket (8lb) just cost me £90 (around $130) so I would hate to get them wrong!

Happy holidays to all you fellow American smokers out there.

Thanks,

John.
Title: Re: First attempt at a multiple smoke!
Post by: beefmann on July 04, 2011, 05:42:08 AM
with that big of a load maybe start a bit earlier... between 8 am and 10 am on friday, Also rotate your racks every 3 to 4 hours, Top to bottom and front to back for even cooking, and no peaking
Title: Re: First attempt at a multiple smoke!
Post by: ghost9mm on July 04, 2011, 06:57:09 AM
Sounds like a plan, hope everything goes well for you and sure it will, have a great 4th..
Title: Re: First attempt at a multiple smoke!
Post by: muebe on July 04, 2011, 07:58:39 AM
As well organized as you post is I do not think you will have a problem. Like beefman said I would start earlier with such a large load. I would leave the brisket at the top. Also you are going to need to change out the water and scrape the grease tray several times with a load like that or you could have a grease fire. I would change the water and clean the tray every time you rotate the butts. Just add hot water so you do not lose heat. Good luck and don't forget the details and pics ;D

And keep that vent wide open ;)