Well first smoke and got in hurry. Threw meat in programmed pie. Dropped in pucks added hot water to pan and turned on. That was two he's ago and im at 155. Checked all lights on and every things plugged in. Smokers smoking good and elements glowing. Had me stumped till I sat row and took a breath. No preheat and a full load of ribs. 0! Guess all to do now is wait. If smoke finishes and stillnot to temp I guess it will go in oven to finish. Just how stupid you got to be to do this! Happy fourth everyone!
You still have plenty of time. Just kick back in the easy chair next to the smoker with a cold one and make like theres a problem. Look over and study everything every now and then then grunt get another cold one and sit down and relax and let things happen. They will never know you forgot to preheat!!
Viper where is your cabinet temp probe for your PID? Make sure it is below the lowest tray of meat otherwise you will get a false reading. And if you have the cabinet loaded with ribs it will take a little while for it to recover so be patient ;)
Let us know how things are progressing for ya if your run into problems...
make sure you have the vent open
Vents open and the probe is between 2nd and 3d shelf.
Thanks guys.
Quote from: viper125 on July 04, 2011, 08:43:21 AM
Vents open and the probe is between 2nd and 3d shelf.
Thanks guys.
Get that probe below the bottom shelf ;)
Quote from: muebe on July 04, 2011, 08:45:20 AM
Get that probe below the bottom shelf ;)
just to clarify - below the bottom shelf that has meat on it.
OK VENTS WIDE OPEN. wAS AT 1/2 APPROX. Dropped probe below the bottom rack of meat. Them jumped form 164 to 185 in about 3 minutes. Great Job every one,great support. Now my problem is how much cooking time and in what stage should I do it. Dont want to dry them out but like falling off the ribs. Im using 3-2-1 at 225 if it gets there. LOL
IMHO ,If your doing baby back ribs,suggest you do 3-1-1. Spare ribs are good with 3-2-1.
Jim O
I'm still going with the sitting in the chair and watching the unit with a cold adult beverage. The temps will recover just fine. You might have to go 3-2-1.5/2 to get them to pull back. But you will be able to tell where you are at when you finish the 3-2 the ribs should be really tender at that point. Then you can modify your finishing time from there.
Well ok for first time. I learned a lot. PREHEAT PREHEAT PREHEAT!! Keep vent wide open and probe low in smoker. Ribs were done and smoked nicely. 2 racks were pretty tender and pulled back. 2 rackes (much thicker were done but chewy) none falling from bone like I wanted. Ending up 1 step 4 hours of heat at various temps. and smoke-2 step wrapped in foil with apple juice 2 hrs.- saused and back on grill for 1 hour. Used Jans rub and shacks barbeque. Everyone loved taste and it was fun watching every one watching smoker and slobering thinking of them. LOL These racks of ribs had a big meaty piece across the top Im not use to. Figured with all the food Id be eating ribs for a week. Leftover every thing but ribs! They lasted less the 20 minutes. Thanks all didnt get but a couple of shots will try and post tomorrow. Im Beat.
Hi Jim, I'm new to using the Bradley and to smoking ribs. Could you explain the 3,2,1 method to me and what temperatures your using. Wanting to smoke two slabs of baby back ribs Brian
Quote from: brogers on July 10, 2011, 04:04:02 PM
Hi Jim, I'm new to using the Bradley and to smoking ribs. Could you explain the 3,2,1 method to me and what temperatures your using. Wanting to smoke two slabs of baby back ribs Brian
Welcome aboard. Here are a few of many threads on the 3-2-1 method:
3-2-1 dumb question? (http://forum.bradleysmoker.com/index.php?topic=22213.0)
3-2-1 ribs? (http://forum.bradleysmoker.com/index.php?topic=15722.0)
Well sent you a pm of things I found out being a newbie. Hope it helps, cant believe I didnt know it all with all i read. But just another old dummy trying. LOL You have came to the right site. This is the most friendly and most helpful site I could recommend.