OK, I have go two 11.5lbs slabs of pork belly. Using the Hi Mountain Buckboard Bacon Cure, instructions say to use one pound of cure PER 25 Lbs of meat. What is the breakdown per pound for pork belly?
Thanks
Not a math wiz
You need to provide us with better information such as the name of the cure, if the percentage of the cure is listed, and need to know if those directions are for a dry or wet cure method. That is very important to know, because the amount of nitrites use in a wet cure is much higher, than what is used for dry curing. Also look to see if it safe something like bacon/ham cure.
If using a dry cure method, I would cut the butts into 2 - 3-inch slabs, or at least in half.
Opps. Sorry habs. Using buckboard Bacon cure.
Are the directions for dry cure or for wet cure?
The conversion for dry curing only would be to convert both the cure and meat into ounces; then divide the weight of the cure, by the weight of the meat.
1 lb./cure = 16 oz/cure
25 lb./meat = 400 oz/meat
16 ÷ 400 = .04 oz/lb
If the curing directions are for use for a wet curing method, then do not use the above formula.
Thank you so much Habs. :)
Its for Dry Cure
Great! Though it seems like a small amount to try to spread evenly on the bellies, so I just got off their site, and their directions are 1 tablespoon + 1-1/4 teaspoons per pound (4-1/4 teaspoons); which has to be more than .04 oz. So you should follow their instructions. Though I would be curious to know what the actual weight per pound is.
So use the following formula instead:
1lb. of cure ÷ 25 lbs of meat = .04lb cure/per lb of met
.04 x 16oz = .64 oz. to use per pound
Directions for High Mountain Buckboard Bacon Cure (http://himtnjerky.com/board-inst.html)
Now I have to figure out why the first formula didn't work.