I have a 6 rack digital smoker and when I turn the smoker on, it will continuously feed the bisquetts until they are gone. I suspect I may need a new circuit board. Does anyone know where I can get one?
Could be just the micro switch is stuck closed, take the smoke generator apart and clean it up. Theres a thread somewhere on here how to do it
Sent from my VM670 using Tapatalk
Hi banditdfw;
Welcome to the forum. It does sound like a micro switch problem. The following link may help.
Bisquettes Continuously Feeding..... (http://www.susanminor.org/forums/showthread.php?488-Answers-To-Bradley-Smoker-FAQ-s&p=988#post988)
Here are more tips and trouble shooting ideas:
Bradley FAQ's (http://www.susanminor.org/forums/showthread.php?481-Bradley-Smoker-FAQ-s&p=748#post748)
Had the same problem a while back. My problem was the micro switch.
Sent from my iPhone using Tapatalk
Thanks for the tips. I just cleaned out the drive unit a while back because the pucks were sticking and I was getting an error indication. I cleaned it out and it worked for a while. I will crack it open again and look at the microswitch.
Thanks again.
Watch the button too! Every once in awhile my advance button sticks and does the same thing.