BRADLEY SMOKER | "Taste the Great Outdoors"

Smoking Techniques => Curing => Topic started by: riggeek on January 30, 2012, 11:05:22 PM

Title: Getting started making bacon
Post by: riggeek on January 30, 2012, 11:05:22 PM
First off this in  great forum with lots of info.

I just purchased a used SS Bradley  done a few minor repairs and love using it now.

I am feeling overwhelmed with the amount of info on curing.  I have read the basic bacon overview thread, and read of the cures overview. i was hoping some would share a basic recipe with me to get started with. I live a ways out in the Nevada desert, and am not sure where to buy some of these cures local. I can have some items shipped from Amazon thou. I can get the Morton tender quick from there.

So which cure to i want to order to get started?

Does the cut of meat matter, which cut?
Title: Re: Getting started making bacon
Post by: Habanero Smoker on January 31, 2012, 02:22:14 AM
There are many types of bacon. The most common is belly (slab) bacon. Another common bacon is Canadian Bacon (or back bacon), which is cured pork loin. Then there is Buckboard bacon (Hillbilly bacon) the is cured pork shoulder. You can also make bacon from some beef cuts. As for other cuts, brisket, beef shoulder, beef sirloin can all be made into corned beef/pastrami, fresh ham can be made into cured ham. So if you are first starting, just focus on one product that you want to make.

You can find some easy to follow recipes at the below link:
Bacon & Other Cured Meats (http://www.susanminor.org/forums/forumdisplay.php?23-Bacon-amp-Other-Cured-Meats)

For curing supplies you generally will have to order them. You will find some suppliers listed in the link below:
Approved Vendors (http://www.susanminor.org/forums/showthread.php?110-Vendors&p=126#post126)

Cure #1 is more versatile, and is use in most recipes, so I would choose that over Tender Quick. If Tender Quick is more convenient, then it can be used but when you find a recipe that call for cure #1 and you only have Tender Quick, it is not a direct 1:1 substitute, so ask more questions before using it. Also at this point you do not want to purchase Morton's Smoke Flavor Sugar cure, that has a completely different use.

So the most important thing is to pick one project, and ask plenty of questions. Once you get your feet wet, and become more confident; you will find that curing meats is relatively easy.
Title: Re: Getting started making bacon
Post by: bille on January 31, 2012, 12:09:47 PM
I have only done a few slabs but I use a very basic cure consisting of 1/4 cup of Kosher salt, 1/4 cup of brown sugar and 2 tsps of Instacure. This is enough for a 5 lb slab, I let it cure for 7 days and then I smoke. As others have stated, I will never go back to store bought bacon. 8)
Title: Re: Getting started making bacon
Post by: Waltz on January 31, 2012, 12:34:57 PM
Maple cured is excellent. I followed a recipe by 10.5, another forum member, and it was easy and turned out well. If you search the recipe pages it should pop up.
Title: Re: Getting started making bacon
Post by: riggeek on January 31, 2012, 11:17:41 PM
Thanks for the reply's everyone.

This extra info has been very helpful.

This is the recipe i have decided to try

http://www.susanminor.org/forums/showthread.php?311-Canadian-Bacon (http://www.susanminor.org/forums/showthread.php?311-Canadian-Bacon)

I have went with this cure

http://www.butcher-packer.com/index.php?main_page=product_info&products_id=56 (http://www.butcher-packer.com/index.php?main_page=product_info&products_id=56)

I am still at work for about 2 more weeks.

I will update this wheni get home and have all the supplies. That will also give me time to finish the mods to the smoker as well.

Title: Re: Getting started making bacon
Post by: Habanero Smoker on February 01, 2012, 01:23:23 AM
Good choice for your first project. Canadian bacon is very easy to make.

DQ Curing Salt, is the same as cure #1. I should have mentioned that cure #1 goes by many brand names.
Title: Re: Getting started making bacon
Post by: beefmann on February 01, 2012, 09:17:01 AM
welcome aboard , good choice on the smoker and good luck with  smokes....  lot of good information here and good recepies
Title: Re: Getting started making bacon
Post by: riggeek on February 18, 2012, 07:39:41 AM
Just a update for everyone

i made it home from work

I mix up the cure yesterday at noon. and got 2  3lb pork loins going. I had 4 but the wife wanted to just try 2 for now.  I will update again after a few more days.
Title: Re: Getting started making bacon
Post by: viper125 on February 18, 2012, 07:48:44 AM
Wife loves my Canadian bacon! But steals a piece of loin every time to make a loin roll the I smoke it with my bacon. Thats ok because they are so good too!
Title: Re: Getting started making bacon
Post by: riggeek on February 24, 2012, 07:51:42 AM
Just pulled them out of the refrigerator.

(http://i1164.photobucket.com/albums/q573/riggeek/IMAG0091.jpg)


Title: Getting started making bacon
Post by: mikecorn.1 on February 24, 2012, 11:27:32 AM
Nice. Keep the pics of the progress coming


Sent from my iPhone using Tapatalk
Title: Re: Getting started making bacon
Post by: viper125 on February 24, 2012, 02:28:30 PM
ooohh ! Those will make great bacon!  Once you try you'll never go back!
Title: Re: Getting started making bacon
Post by: riggeek on February 24, 2012, 03:54:45 PM
This photo is after the smoking. I pulled them out at 143 deg.

(http://i1164.photobucket.com/albums/q573/riggeek/IMAG0092.jpg)

They are wrapped and in the refrigerator for 2 days before eating.
Title: Re: Getting started making bacon
Post by: Bavind on February 24, 2012, 09:20:38 PM
You will never go back to store bought bacon again
Title: Re: Getting started making bacon
Post by: devo on February 24, 2012, 09:31:01 PM
In Maple Cured Bacon From Tenpoint5 the recipe calls for

2 oz. Kosher salt (about 1/4 cup)
2 tsp. Cure #1 (aka pink salt, InstaCure #1, Prague Powder #1)
1/4 C. Maple sugar or packed brown sugar
1/4 C. Maple syrup

5 lb. fresh pork belly
(Makes enough for a 5 lb. belly)

I believe but don't quote me on this the extra cure is needed to penetrate through the meat during the long cure period. When ever I have done bacon there is a lot of liquid in the bag and this could be another reason for the extra cure. Just my thoughts on this but I will let someone who knows better answer why extra cure is needed.
Title: Re: Getting started making bacon
Post by: KyNola on February 25, 2012, 06:53:40 AM
You know what?  I believe you are correct now that you mention it Devo.  Thanks for reminding me and I am going to remove my reply.

Sorry 'bout that bille.
Title: Re: Getting started making bacon
Post by: Tenpoint5 on February 25, 2012, 09:26:08 AM
Quote from: devo on February 24, 2012, 09:31:01 PM
In Maple Cured Bacon From Tenpoint5 the recipe calls for

2 oz. Kosher salt (about 1/4 cup)
2 tsp. Cure #1 (aka pink salt, InstaCure #1, Prague Powder #1)
1/4 C. Maple sugar or packed brown sugar
1/4 C. Maple syrup

5 lb. fresh pork belly
(Makes enough for a 5 lb. belly)

I believe but don't quote me on this the extra cure is needed to penetrate through the meat during the long cure period. When ever I have done bacon there is a lot of liquid in the bag and this could be another reason for the extra cure. Just my thoughts on this but I will let someone who knows better answer why extra cure is needed.

Yes the extra cure #1 is to allow for the cure that will remain suspended in the liquid and not com in contact with the meat
Title: Re: Getting started making bacon
Post by: riggeek on February 26, 2012, 02:37:45 PM
Here is the last photo with the slices.

the taste very good slightly sweet, and i love the Maple smoke smell. The salt level is just right.

(http://i1164.photobucket.com/albums/q573/riggeek/IMAG0099-1.jpg)
Title: Getting started making bacon
Post by: mikecorn.1 on February 26, 2012, 05:00:44 PM
Nice!!


Sent from my iPhone using Tapatalk
Title: Re: Getting started making bacon
Post by: SiFumar on February 26, 2012, 08:49:02 PM
Great job! You done good!