BRADLEY SMOKER | "Taste the Great Outdoors"

Bradley Smokers => Smoke Generator with Adaptor (BTSG1) => Topic started by: toxic0111 on January 29, 2006, 05:47:26 PM

Title: Converting Blanket Warmer to Smoker
Post by: toxic0111 on January 29, 2006, 05:47:26 PM
I got a blanket warmer from a hospital and converted it with the Bradley smoke generator but the heating element that is in the warmer only produces about 150 degrees of heat, not enough to hot smoke or cook, my question is does anyone know where I can find the 500 watt heating element complete with the thermostat that is used in the BS's
Thanks
Toxic0111
Title: Re: Converting Blanket Warmer to Smoker
Post by: Oldman on January 29, 2006, 09:59:20 PM
I know Chez sell the complete original Bradley heating element with holder and the rheostat that is used in the Bradley   http://www.chezbubba.com . You might want to call him first... his number is at the bottom of the link.

Olds
(http://www.susanminor.org/Rayeimages/gif/Launch47.gif)
Title: Re: Converting Blanket Warmer to Smoker
Post by: toxic0111 on January 29, 2006, 11:10:44 PM
Thanks Oldman, sent Chez an email so will wait and see what his reply is, greatly appreciated the link
toxic0111
Title: Re: Converting Blanket Warmer to Smoker
Post by: Gman on October 12, 2006, 08:31:18 PM
Have u tried or thought about a heater used to heat your home a small space heater
Iused a 1500 watt heater and after taking it apart and installing it in the box i gat the best smoked meat ever. I have been busy all summer and hav'nt updated my pictures will try to do that this month
Lok at mine
(http://img.photobucket.com/albums/v486/todayschildhere/DSC01334.jpg)
(http://img.photobucket.com/albums/v486/todayschildhere/DSC01336.jpg)
(http://img.photobucket.com/albums/v486/todayschildhere/DSC01084.jpg)
(http://img.photobucket.com/albums/v486/todayschildhere/DSC01087.jpg)
Title: Re: After smoking
Post by: Boybach on January 15, 2007, 12:29:56 AM
Hi Folks
More advice please
After completing my smoking project the inside of my cabinet is speckled with smoke tar et al. The aroma is absolutely fantastic but the inside of the cabinet obviously looks dirty. Do I wash and clean the insides down to pristine condition or do I leave it as is?. My thinking is the enclosed smell will help enhance future smokes, but am now worried that it could be unhealthy and unwise to leave it. As usual thanks in advance for your help ;)
Title: Re: Converting Blanket Warmer to Smoker
Post by: Habanero Smoker on January 15, 2007, 03:18:22 AM
I'm not sure how your post ended up here.

After each smoke I clean the door seal, "V" pan, built up grease or food matter that may be sticking to the sides, and of course the trays. If there are any flakes clinging to the sides I lightly brush them off with a wad of crumbled up newspaper or foil.

Periodically I will disassemble the vent, and open the generator cover and clean them.
Title: Re: Converting Blanket Warmer to Smoker
Post by: Wildcat on January 15, 2007, 12:26:13 PM
What Hab said.  Keep smoke for flavor, dispose of food, clean potential problem areas.  Germs (if present) will not survive on smoke residue when you fire it up again. ;)