Hello I just recieved a replacement door from the factory due to mine being damaged in the box but have no instructions on proper removal of old door and installation of new one.
Thanx
Big T
Maybe someone who has done this will pop in, but if it doesn't look starightforward you can send an e-mail or a call to Bradley may be worthwhile.
I will have to look on mine when I get home. I am pretty sure I just took off the screws on the top and bottom and lifted the door off the hinge.Will let you know.
Ok you have to take the bottom face plate off. There are screws behind the magnet strip on the inside of the door. Just pull down on the strip and you will see the screws(don't pull to hard). If I remember right you may have to take the top hinge bracket off(not sure though). Then you should be able to lift up on the door and take it off. Be careful tightening the screws back on the bottom face plate,they strip easy.