BRADLEY SMOKER | "Taste the Great Outdoors"

Bradley Smokers => The Digital Smokers (BTDS76P & BTDS108P) => Topic started by: RedneckRN on March 26, 2012, 07:20:04 PM

Title: Cleaning the racks
Post by: RedneckRN on March 26, 2012, 07:20:04 PM
I purchased a set of jerky racks for my Bradley and have used them to smoke salmon but when it came time to clean up it appears that the teflon or whatever black coating there is has rubbed off. I need help on this matter and would appreciate any tips on cleaning these and the regular racks.
Title: Re: Cleaning the racks
Post by: fishrman on March 26, 2012, 08:45:45 PM
Yeah, I had the same experience.  It seems that the black is a cheap anodizing that wears through quickly if you use any abrasive scrubber on them.  I've run them through the dishwasher also and, for whatever reason, seems like rust appears at all the joints.  I've stopped stressing about it and rub them with a damp paper towel to get the loose oxidization off before using them.  Also frequently use frogmats on top, so becomes a non-issue then.
Title: Cleaning the racks
Post by: anthony on March 27, 2012, 03:49:37 AM
I have the same problem with my jerky mats, they rusted first time I put them in the dishwasher.   I called Bradley about them and i was taken care off by a nice lady.  I was told they should not rust when put in the dishwasher. Needless to say I do not put the new racks in the dishwasher and they seem to be holding up better.  If I had to do it over again I would have just bought another set of regular racks and frogmats for the times I need small holes. 


Sent from my iPad using Tapatalk HD
Title: Re: Cleaning the racks
Post by: Salmonsmoker on March 27, 2012, 07:12:54 AM
Same problem here. I don't stress about it either. I spray them with a light oil coating after washing and drying to keep the rust at bay. Food seemed to stick worse when the non-stick coating was intact. I use a release agent that's called PeelEase that works better than Pam.
Title: Re: Cleaning the racks
Post by: beefmann on March 27, 2012, 04:15:17 PM
i hear you , i have the shame issue on the chrome plated version, what i do now is i have a plastic sink outside hooked directly to my  sewer  and put the  plug in, add some  liquid soap, a little oxi clean soak over  night ,,, hit it with powerfull water  stream and in a  few  seconds  its 95 % clean... little pick here and there and hit it  with the hose and its  clean
Title: Re: Cleaning the racks
Post by: KyNola on March 27, 2012, 07:21:06 PM
One word....."Frogmats".
Title: Re: Cleaning the racks
Post by: josbocc on March 28, 2012, 03:56:47 PM
QuoteOne word....."Frogmats".

Ditto!
Title: Re: Cleaning the racks
Post by: RedneckRN on March 29, 2012, 11:03:31 AM
OK Frogmats are on order and will put them to the test ASAP. Thank you all for tips and wisdom
Title: Cleaning the racks
Post by: mikecorn.1 on March 29, 2012, 11:40:30 AM
Quote from: RedneckRN on March 29, 2012, 11:03:31 AM
OK Frogmats are on order and will put them to the test ASAP. Thank you all for tips and wisdom
Frogmats are the shiznit. They are super easy to clean. You will get some gunk on The racks that get thru the frogmats but I have found that it's 1000 times easier to clean them, than without the mats on them.   


Sent from my iPhone using Tapatalk
Title: Re: Cleaning the racks
Post by: Smoker John on March 29, 2012, 11:52:14 AM
One of the first things I bought were Frog Mats based on what I read here, that & the saver pucks, both good investments.
Title: Cleaning the racks
Post by: mikecorn.1 on March 29, 2012, 11:58:41 AM
Quote from: Smoker John on March 29, 2012, 11:52:14 AM
One of the first things I bought were Frog Mats based on what I read here, that & the saver pucks, both good investments.
Yes they are. I would say pucks and maverick or similar item. Just me :)


Sent from my iPhone using Tapatalk
Title: Re: Cleaning the racks
Post by: Salmonsmoker on April 01, 2012, 07:34:11 AM
Ditto with beefmann on the liquid soap and oxyclean. My frogmats and racks both get that treatment. Works great.