When you first get smoker. How long do you have to let it smoke to get all the factory chemicals off
Seasoning Method:
• Clean Racks, Drip Tray, Drip Bowl and Rectangular Tray and place in smoker.
• Fill the Drip Bowl half full of water.
• Load the Feeder Tube with 5 Bisquettes. (note: each Bisquette burns for 20 minutes). The 2 extra Bisquettes are meant to push the final Bisquette onto the Burner. These last 2 Bisquettes will not advance onto the Burner.
• Open the damper slightly at the top of the Smoker Tower.
• Plug smoker into its own designated outlet.
• Turn on the smoke generator by pressing the Generator On/Off Switch (12).
• Pre-heat Bisquette Burner for 20 minutes.
• Press Bisquette Advance Button (6) until a bisquette is on the Bisquette Burner (F).
• Turn on the smoker by moving the temperature heat control switch (10) to medium. Wait for 20 to 30 minutes. The thermometer (9) should read 66°C (150°F). If it is higher, bring down the temperature by adjusting the temperature heat control switch to the left to lower and vice versa when the temperature reads lower than 66°C (150°F).
• Smoke the tower continuously at 66°C (150°F) for 1 hour, or until bisquettes are out.
• Your Smoker will be seasoned having reached 150º F and smoked in for 1 hour.
CLick here (http://www.susanminor.org/forums/forumdisplay.php?180-Our-Time-Tested-and-Proven-Recipes) then go to Bradley Smoker FAQS. Theres lots of good info.
Sent from my iPhone using Tapatalk