I have a friend that is getting the OBS, new version. He wants to mod it to add the second element and add a shut off switch for the element. Between us we have done this mod on 3 other OBS units but they were the original version.
Is the mod the same for the new version? Or is there a difference- if so, what?
Can the dual probe PID be used on the new version and control the smoke generator?
Can the smoke generator be shut off and the elements still be "on" using the PID or does the wiring of the new version prevent this?
thanks
Not sure about the mod, but my PID definitely controls the smoke generator separately from the element I have to set it for when smoke goes on and off.
Gus, wait till you get it and check it out,,, I do not know of any differences on the tower,,, the smoke generator has changed so we have easy access from the front i believe ... no other changes that im aware of
Since the temperature control is now located in the generator, this may present a problem, when you want to run without a PID. There would be no problem wiring the cabinet with an additional element with and On/Off switch, and the PID can control one or both elements. When you want to run without the PID, turn the second element off and plug the cabinet into the back of the generator.
Gus
Here are some pics of the BS611.
(http://i868.photobucket.com/albums/ab242/nepas1/bradley%20parts/611gen.jpg)
(http://i868.photobucket.com/albums/ab242/nepas1/bradley%20parts/bs611.jpg)
(http://i868.photobucket.com/albums/ab242/nepas1/bradley%20parts/611.jpg)