So pulled some parts off a stove I had that went through the tornado. Has anyone tried doing this? I'm a little nervous about cutting a hole the size that it would require but I think it would be worth it for those long night smokes. Also plan on hooking my fan up with the door switch when it gets here.
So am I crazy to attempt this? Anyone else ever try it?
Parts
(http://img.tapatalk.com/d/14/01/30/ruje6e7a.jpg)
Sent from my Samsung Galaxy Note 2
I would think after a few smokes the bulb would get pretty nasty looking.
Quote from: watchdog56 on January 29, 2014, 02:50:10 PM
I would think after a few smokes the bulb would get pretty nasty looking.
It has a globe that cam be removed. Maybe clean it every so often?
Sent from my Samsung Galaxy Note 2
Perhaps it will help generate a little more heat! ;D
You have a 4 rack or a 6 rack? I ask because it may take up some room that you may need. With my four rack OBS I have cooked 2 9 lb butts and 2 12 lb briskets and it was a snug fit. I had already removed the Bradley door temp probe since it got in the way. So a light bulb could get in the way.
Also, wouldn't whatever you are cooking block the light?
6 rack. Was thinking in top right corner. Most I have done(yet) is 2 butts, just dont have enough people to eat more. Going in the door may be a decent option. It would only sit in the cabinet about an inch if I mount it like it was in the stove.
Sent from my Samsung Galaxy Note 2
I use one of these. Hands are free to open and adjust your racks.
(http://www.energizer.com/SiteCollectionImages/cutups/Outdoor/outdoor-3-led-headlight.png)
What about mounting the light on the outside of the cabinet on top with a hole underneath it and use one of the high temp glass covers inside a home oven on the inside of the cabinet?
I agree with Devo, i've got a headlamp i use. the inside of my smoker is BLACK, i can't see a light bulb lasting too long, and in the end, just something else you need to clean everytime you smoke.
Quote from: Saber 4 on January 29, 2014, 06:08:52 PM
What about mounting the light on the outside of the cabinet on top with a hole underneath it and use one of the high temp glass covers inside a home oven on the inside of the cabinet?
Thats what it is. High temp cover, with socket, bracket and bulb. Yanked it all out of an oven earlier and the door switch.
I have a headlamp for work but its attached to my hardhat and kind of a pain to use now. And thought it would be cool to have something unique.
Sent from my Samsung Galaxy Note 2
Quote from: devo on January 29, 2014, 05:00:28 PM
I use one of these. Hands are free to open and adjust your racks.
(http://www.energizer.com/SiteCollectionImages/cutups/Outdoor/outdoor-3-led-headlight.png)
Yup. I've got a couple different LED lights. One with straps similar to the one pictured and another that clips to the bill of a cap. Use em for night smoking, fishing, picking night crawlers etc. basically anything that requires both light and the use of both hands.
Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
Quote from: hutcho on January 29, 2014, 06:43:52 PM
Quote from: Saber 4 on January 29, 2014, 06:08:52 PM
What about mounting the light on the outside of the cabinet on top with a hole underneath it and use one of the high temp glass covers inside a home oven on the inside of the cabinet?
Thats what it is. High temp cover, with socket, bracket and bulb. Yanked it all out of an oven earlier and the door switch.
I have a headlamp for work but its attached to my hardhat and kind of a pain to use now. And thought it would be cool to have something unique.
Sent from my Samsung Galaxy Note 2
In that case, go for it, the only thing I would be leery of would be smoke damaging the door switch when the door is open. I would probably just put a switch on top of the cabinet and just flip it on when I'm smoking at night.
Quote from: Saber 4 on January 29, 2014, 06:50:15 PM
Quote from: hutcho on January 29, 2014, 06:43:52 PM
Quote from: Saber 4 on January 29, 2014, 06:08:52 PM
What about mounting the light on the outside of the cabinet on top with a hole underneath it and use one of the high temp glass covers inside a home oven on the inside of the cabinet?
Thats what it is. High temp cover, with socket, bracket and bulb. Yanked it all out of an oven earlier and the door switch.
I have a headlamp for work but its attached to my hardhat and kind of a pain to use now. And thought it would be cool to have something unique.
Sent from my Samsung Galaxy Note 2
In that case, go for it, the only thing I would be leery of would be smoke damaging the door switch when the door is open. I would probably just put a switch on top of the cabinet and just flip it on when I'm smoking at night.
It was never mounted inside the oven. It has a long rod that runs through and switch is in the back of the unit. I found a place on the outside of the cabinet it will work. Sucks that its a NO switch though.
Sent from my Samsung Galaxy Note 2
add a switch to it.
During a long night smoke, I haven't found myself looking into the smoker. My remote thermometer tells me the IT from the comfort of my well lit house, I don't need a lot of light to change the water, I try to time my cooks to be completed during daylight hours. Do you really need a light in the Bradley? Seems to be a lot of work for little benefit.
When I set up my smoker house I figured out that I'd want some light in the smoker house and the ability to light up the inside of the smoker during those over night smokes. After looking at several options, I went with a magnetic base work light on a flexible arm. The kind you often see on on wood or metal working machines. Got mine from Rockler. No the cheapest option, but it works really well from the lighting perspective (the magnetic base could be more powerful). I can adjust the light to light up the inside of the smoker or to light up something else I want to see well, without the light being in the way of the smoker door, etc.