I made an enclosure box for my smoker and it turned out pretty nice will upload some photos later, what I didn't reliazed that when I turned it into cold smoke as I made a smaller box and installed the smoke generator to that, I didn't take into account the power cable from the smoke generator to the cabinet is now way to short. I'm starting cooking at 7 so I need a solution. Couldn't I simple just connect the cabinet to an extension bar and then the smoke generator to the extension bar also? I can just use a computer cable for the Bradley I believe it's the same end.
Sent from my SGH-I337M using Tapatalk
If you have the OBS you can do that. Not familiar with the digital.
Quote from: ghosttown on August 21, 2015, 07:46:33 PM
I made an enclosure box for my smoker and it turned out pretty nice will upload some photos later, what I didn't reliazed that when I turned it into cold smoke as I made a smaller box and installed the smoke generator to that, I didn't take into account the power cable from the smoke generator to the cabinet is now way to short. I'm starting cooking at 7 so I need a solution. Couldn't I simple just connect the cabinet to an extension bar and then the smoke generator to the extension bar also? I can just use a computer cable for the Bradley I believe it's the same end.
Sent from my SGH-I337M using Tapatalk
you can, the big issue with that is yo have NO Temperature Control at all as the heater will be going full blast all the time rather them the digital controller taking care of maintaining the set temps.
what you may be able to do is go to your local electronics or computer store with the short jumper cable and see if the have one that is longer ,... or see if they can provide a pair of cables that may work..
I did find a longer cable at home, but because I have the OBS I thought the temp control is on the unit itself and not on the smoke generator
Sent from my SGH-I337M using Tapatalk