Help i have been givin a free orignal 4 rack smoker. The problum is it heats up element and burner, but the puck advance will not move. I push the button nothing happens? I have cleaned it still no luck all ideas welcome.
It may be a problem with the motor, or micro switch or both. One or both may need to be replaced. Yard & Pool has the motor, but I didn't see the micro switch on their site. If you need it you should send them an email. There are other components in the generator, but I've never seen any posts that those components have failed.
During the cleaning, did you check all the wiring to make sure everything was connected, and checked the micro switch?
If not open it back up, and check the micro switch to make sure it is not stuck. Clean it with electrical contact cleaner, and manually depress the micro switch to make sure it clicks.
Do you hear any noise when you depress the advance button?
If not, again check the wiring to the motor. If it make a noise, the arm could be jammed, or one of more gears inside can be stripped.
The below link will provide more details:
Bradley FAQ's (http://www.susanminor.org/forums/showthread.php?960-Bradley-Smoker-FAQ-s&p=1409#post1409)
thanks I will get into it today.
Thanks for the help Habanero Smoker, I have just purchased a new smoker motor I cant wait to get this second one up and running.
Great!!
Thanks again for the information Habanero Smoker, the new motor showed up installed and thanks to Yard & Pool I'm up and running with the smoker, the parts were perfect and on time thanks all for the help and information. Shasta bob
You're welcome. Great to hear you have it up and running.