BRADLEY SMOKER | "Taste the Great Outdoors"

Miscellaneous Topics => Feedback and Help => Topic started by: BBQnFool on July 29, 2004, 06:36:58 PM

Title: Pushing multiple bisquettes
Post by: BBQnFool on July 29, 2004, 06:36:58 PM
I'm having a bit of problems with my cooker that I hope someone might be able to help with. The smoke generator on my BS has a nasty habit of pushing out 5 or 6 bisquettes in a row without stoping! It'll be working just fine, then all of a sudden it pushes a ton of them down the ramp.  Any ideas?  My BS is about 5 years old, so no warranty to fall back on.

Thanks in advance.
Tom

Tom Brohamer
Owner/Partner - BBQ'n Fools
"When it comes to your BBQ, we're not Fool'n around!"
Visit us at: www.BBQnFools.com
Title: Re: Pushing multiple bisquettes
Post by: BigRed on July 29, 2004, 07:01:16 PM
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by BBQnFool</i>
<br />I'm having a bit of problems with my cooker that I hope someone might be able to help with. The smoke generator on my BS has a nasty habit of pushing out 5 or 6 bisquettes in a row without stoping! It'll be working just fine, then all of a sudden it pushes a ton of them down the ramp.  Any ideas?  My BS is about 5 years old, so no warranty to fall back on.

Thanks in advance.
Tom

Tom Brohamer

Tom - I would call Bradley Smoker and discuss this with a customer servic peson.  They replaced mine because it did not move bisquettes at all. Sweet talk them a little telling them what a great product the BS is. They just might send you another generator. Good Luck!

BigRedRon


Owner/Partner - BBQ'n Fools
"When it comes to your BBQ, we're not Fool'n around!"
Visit us at: www.BBQnFools.com

<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

BigRED
Title: Re: Pushing multiple bisquettes
Post by: Bassman on July 29, 2004, 09:37:42 PM
It definetly sounds like the generator, I would call Bradley.

<i><font color="blue"><b>Jack</i></font id="blue"></b>
Title: Re: Pushing multiple bisquettes
Post by: Chez Bubba on July 30, 2004, 02:31:36 AM
Tom,

When was the last time you cleaned out your feeder? Kinda sounds like the limit switch can't reach home & is recycling, probably because of a bunch of built up gunk.

Or it's toast![:D]

Feel free to give me a call.

Kirk

http://www.chezbubba.com
Ya think next time I check into a hotel & they ask "Smoking or Non?" they would mind?
Title: Re: Pushing multiple bisquettes
Post by: BBQnFool on July 30, 2004, 04:31:44 PM
Chez Bubba (Kirk),

Thanks for the info, other than general cleaning, I have never cleaned out the feeder.  I'm assuming the problem is probably gunk inside, so I'll open it up and give it a complete once-over.  With any luck, that'll do it.

Thanks.
Tom

Tom Brohamer
Owner/Partner - BBQ'n Fools
"When it comes to your BBQ, we're not Fool'n around!"
Visit us at: www.BBQnFools.com
Title: Re: Pushing multiple bisquettes
Post by: kjel on July 30, 2004, 08:49:41 PM
Kirk,
Is there a special way to clean out the feeder?  I normally just pick up the smoker part of it a shake it upside down until all the wood flakes fall out.
Title: Re: Pushing multiple bisquettes
Post by: Chez Bubba on July 31, 2004, 02:56:04 AM
Kellie,

That will work for basic maintenance, but after a while, the creosote wafts back through the feeder & creates the sticky stuff that really makes those bisquette flakes build up.

There are 6 screws on the perimeter of the bottom of the feeder that allow you to easily disassemble it. I take an old toothbrush & give it a go. There are also 4 screws that hold the pusher plate assembly in place. You'd be surprised at how much crap can build up in there.

It's all relative to how much you smoke at a time & how often you smoke. I try to give mine "the treatment" every 6 months or so, but I smoke several hundred pounds during that timeframe.

Kirk

http://www.chezbubba.com
Ya think next time I check into a hotel & they ask "Smoking or Non?" they would mind?
Title: Re: Pushing multiple bisquettes
Post by: SmokinDoc on July 31, 2004, 03:59:55 PM
Chez,

I think using a toothbrush is a good idea for cleaning the smoke generator,but what cleaning agent do you use.<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Chez Bubba</i>
<br />Kellie,

That will work for basic maintenance, but after a while, the creosote wafts back through the feeder & creates the sticky stuff that really makes those bisquette flakes build up.

There are 6 screws on the perimeter of the bottom of the feeder that allow you to easily disassemble it. I take an old toothbrush & give it a go. There are also 4 screws that hold the pusher plate assembly in place. You'd be surprised at how much crap can build up in there.

It's all relative to how much you smoke at a time & how often you smoke. I try to give mine "the treatment" every 6 months or so, but I smoke several hundred pounds during that timeframe.

Kirk

http://www.chezbubba.com
Ya think next time I check into a hotel & they ask "Smoking or Non?" they would mind?
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

Duane
Title: Re: Pushing multiple bisquettes
Post by: Chez Bubba on August 01, 2004, 11:15:55 PM
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by SmokinDoc</i>
<br />Chez,

I think using a toothbrush is a good idea for cleaning the smoke generator,but what cleaning agent do you use
Duane
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">Nothing, just the toothbrush.

http://www.chezbubba.com
Ya think next time I check into a hotel & they ask "Smoking or Non?" they would mind?