BRADLEY SMOKER | "Taste the Great Outdoors"

Smoking Techniques => Curing => Topic started by: speltman on February 12, 2008, 09:13:08 AM

Title: Slim Jims
Post by: speltman on February 12, 2008, 09:13:08 AM
  I would like to do some "slim Jim" size sausage sticks. Problem is i can't find the casings. My Cabela's grinder has a 10mm stuffing tube but the smallest casings I can find are 17 mm. I have tried all the normal sources, Sausage Maker, Cabelas, etc. Has anyone else made these. Thanks Scott
Title: Re: Slim Jims
Post by: Mr Walleye on February 12, 2008, 10:12:58 AM
Here is a sizing chart I came across. You will see for 17 mm casings most people use a 3/8 stuffing tube on their stuffer. For the 21 or 23 mm casings they use a 1/2 stuffing tube. I think your 10 mm stuffing tube is pretty close to 3/8 of an inch or a little larger.

http://www.deejayssmokepit.net/SausageDownloads_files/CasingsTubes.pdf

Mike
Title: Re: Slim Jims
Post by: speltman on February 12, 2008, 09:24:41 PM
  Thanks for the info. I tried some 19 mm casings with my stuffer from Sausage Maker. I think it had the 5/8 tube, and they were way to big. I will try the 10mm tube with the 17mm casings. Is it possible to over stuff the casings? Maybe i am over stuffing. Thanks Scott   
Title: Re: Slim Jims
Post by: Stickbowcrafter on February 19, 2008, 07:48:15 AM
You'll probably find it difficult to reproduce very thin "Slim Jims" at home that match the comercial product. You can overstuff a casing which usually leads to breaking or the inablility to twist into links. So, no, your size problem is not over stuffing. Welcome aboard and good luck.

-Brian
Title: Re: Slim Jims
Post by: speltman on February 19, 2008, 04:34:52 PM
Thanks for your help. Thought I was doing something wrong. I wonder if you can buy a smaller casing somewhere. Smallest i have seen is a 17. Thoes store bought slim jims must be in about a 12 casing. Scott 
Title: Re: Slim Jims
Post by: West Coast Sausage Maker on May 14, 2008, 11:50:28 PM
Quote from: speltman on February 19, 2008, 04:34:52 PM
Thanks for your help. Thought I was doing something wrong. I wonder if you can buy a smaller casing somewhere. Smallest i have seen is a 17. Thoes store bought slim jims must be in about a 12 casing. Scott 

I've made a few slimJims in my time.   I use a 22 mm collagen casing. It is the industry standard. Durung the drying process the slimjims should look like a 12-15 mil stick If dried corectly.

here is a before and after picture of a 50 lb batch

(http://www.butcherblockfoods.com/IMG00138.jpg)
(http://www.butcherblockfoods.com/IMG00137.jpg)

(http://www.butcherblockfoods.com/IMG00129.jpg)
Title: Re: Slim Jims
Post by: Smoking Duck on May 15, 2008, 11:30:11 AM
Jeez.....that big thing is a Bradley on steroids!
Title: Re: Slim Jims
Post by: speltman on May 16, 2008, 08:31:46 AM
Nice... I think my problem was that they smelled sooo good I ate them all up before they were dried correctlly. I guess the answer is to make 50lbs at a time so there are a few left overs.
Title: Re: Slim Jims
Post by: Piker on May 16, 2008, 02:20:24 PM
I finally found a thread on sausage making as that is what I do the most of. I have tried numerous casings but I find the edible collagen in 17mm and 30mm work great for me. The 17mm i use for breakfastsausage and pepperonis. The 30mm I use for all my fresh sausage. I get the 3in. by 24in. artificial collagen for summer sausage that require time in the smoker. I have learned lots already on this thread. Thanks Dave