Text only | Text with Images

BRADLEY SMOKER | "Taste the Great Outdoors"

Bradley Smokers => The Digital Smokers (BTDS76P & BTDS108P) => Topic started by: craigson2 on August 30, 2008, 10:00:17 AM

Title: Problem With new smoker "E"
Post by: craigson2 on August 30, 2008, 10:00:17 AM
Hello all this is my first time on this site pretty cool cant wait to try some of the recipes you all have put on here. I have the Bradley Digital smoker and keep getting an error it flashes E on the smoker it heats up just fine but the smoke wont start it just empties the holder of all pucks I can get it to work if I turn it on and of ten or twelve times and thirty or so minutes of frustration I have cleaned out the unit still no help
Does anyone have any ideas for me?


Brian
Title: Re: Problem With new smoker "E"
Post by: deb415611 on August 30, 2008, 10:36:25 AM
Craigson2,

Welcome!

Try looking at the FAQs  on the recipe site -- go down to the digital smoker section.  There is a faq or two on error messages.  http://www.susanminor.org/forums/showthread.php?t=481     Lots of other great info there also.

If that doesn't help someone I imagine someone that has the digital smoker will pop in and help you out.

Deb

Title: Re: Problem With new smoker "E"
Post by: craigson2 on August 30, 2008, 10:39:46 AM
Deb,

  That did help Tey have info on an E message so I will try it out

Thanks,

Brian
Title: Re: Problem With new smoker "E"
Post by: Consiglieri on August 30, 2008, 01:02:06 PM
Brian:  E error message deals with the connection between the box thermometer and the digital box.  Could be an incomplete "plug in" on the cable; could be a broken connection.  Good luck. 
Title: Re: Problem With new smoker "E"
Post by: Mr Walleye on August 30, 2008, 01:26:54 PM
Hi Brian and welcome to the forum.

Is the error message "E1" or is it "E"?

Usually the E1 message is the small cord (temp wire) between the generator and the tower. If I understand your problem correctly, your main heater in the tower is working ok (does it turn red hot?), and when you fill the tube on the generator with pucks it just keeps feeding them one after another. Is this correct?

Mike
Title: Re: Problem With new smoker "E"
Post by: craigson2 on August 30, 2008, 02:34:56 PM
Yes that is correct it just keeps pushing out until empty and the heater is red hotr
Title: Re: Problem With new smoker "E"
Post by: Mr Walleye on August 30, 2008, 02:43:11 PM
Brian

Unfortunately it would appear there is a problem with the digital controls in the generator. The only other thing it could be is the momentary advance button being stuck in the closed position. This does happen sometimes on the OBS but I have never heard of it happening on the DBS because of the different type of switch they have.

My thought is to call Bradley and have them send you a new generator out to you. I'm assuming it's new and still has warranty. They are usually very good to deal with and are quick to make things right.

Keep us posted.

Mike
Text only | Text with Images