I want to first say Hi to everyone on the forum I have been gone for quite sometime.
I have a problem I neeed solved and decided to go to this forum because I have seen some very inteligent Members here.
So here is what I have and at the end is a few images.
I found this a few years ago and would realy like to knlw what it is? It has Rollcom and a # etched in the side and top piece. The machining of this is amazing I ttook it to a friend who sells Rolled tubing and he said the machining on this is very precise. It has zero tolerance as to all measurements inside and out. Inside the tail piece has a concave exit for something to exit there are 2 holes on the outside across from each other to put some sort of tool to tighten and loosen (or open ) . The threads to screw pieces together are very tight . Back end or tail has a seal and all the holes are drilled at an angle so as to have thrust in a spirel mothin for whatever is going to exit it under presure
(http://img.photobucket.com/albums/v486/todayschildhere/DSC00628.jpg)(http://img.photobucket.com/albums/v486/todayschildhere/DSC00627.jpg)(http://img.photobucket.com/albums/v486/todayschildhere/DSC00626.jpg)(http://img.photobucket.com/albums/v486/todayschildhere/DSC00620.jpg)(http://img.photobucket.com/albums/v486/todayschildhere/DSC00619.jpg)(http://img.photobucket.com/albums/v486/todayschildhere/DSC00618.jpg)(http://img.photobucket.com/albums/v486/todayschildhere/DSC00617.jpg)(http://img.photobucket.com/albums/v486/todayschildhere/DSC00623.jpg)(http://img.photobucket.com/albums/v486/todayschildhere/DSC00622.jpg)(http://img.photobucket.com/albums/v486/todayschildhere/DSC00616.jpg)(http://img.photobucket.com/albums/v486/todayschildhere/DSC00624.jpg)(http://img.photobucket.com/albums/v486/todayschildhere/DSC00625.jpg)(http://img.photobucket.com/albums/v486/todayschildhere/DSC00621.jpg)
Wow Gman! I don't have a clue! ???
It's interesting though... Keep us posted... I'd be interested to know as well. Things like that drive me nuts till I figure it out. ;)
Mike
Could be a filter holdere, or a pressure regulator or something..
just my SWAG..
Thought I could put on Ebay. Wow could emagine my surprise .
Knock at the door.... hold on....
I'm back . It was HomeLand Security. :( I gotta Go.
Quote from: Gman on February 14, 2009, 12:23:49 PM
Thought I could put on Ebay. Wow could emagine my surprise .
Knock at the door.... hold on....
I'm back . It was HomeLand Security. :( I gotta Go.
:D :D :D :D ;D
LMAO
Mike
It looks to be Stainless Steel and high pressure. I have a friend who looked at these pics and he thinks it might be used in something with pasteurization/homogenizing process. He works with a company that does allot of that kind of stuff.
nepas
Gman = Gov't man?
All Kidding aside it does look like a homemade aerial bomb droplet as part of a cluster bomb. Missing the primer and the explosive.
Other than that WAY Outside the box guess I don't have a clue.
part of a cluster bomb....
That was one senerio I had but if it was wouldn't the sidewalls have to be thinner?
I just noticed something funny my login name Gman
and I'm talking bombs.....
my name Dennis G. ;)