Hi all
I am doing two 1# pork tenderloins I used Habanero Canadian Bacon-dry rub for 5 day.
then soak then dry it .then put on the Rub.I turn on the DBS at 1130am set the dbs 300* it was 70* out side lite wind.
here are the reading.( the smoke gen was on the hole time) I put in the meat hot water and a warm brick in tin foil at 1:00pm
start time bradly set point bradley read Fluke metter read maverik read
1200 pm 300* 137* 130 136 maverik prob two
100 pm 300 111 103 113
200 pm 320 126 120 120
300 pm 320 153 127 127 meat inside now is 125*
330 pm 320 151 124 125 125*
400 pm 320 149 122 123 125*
The smoker should get up to 220* in four Hr right. I dont know what to do with the temp! Am I doing something worng at this point I have to bring the meat in the house to put it in the oven .I would like to get the meat to 150*or so. It looks to me that the DBS wont get up to the right temp to start with.
I only open the door to put in the meat
Thank for any help
It looks like your heating element was not working, and the only heat provided was from the generator. Open the door, and look at the elements; they should be glowing red. If not make sure the power cord that runs from the cabinet to the generator is securely plugged in. Unplug it form both ends and reconnected them. Do this a few times.
You can also look throught these tips:
Bradley FAQ's (http://www.susanminor.org/forums/showthread.php?t=481)
Thanks
The element is on but not glowing red just dim red.
Harb your dry-cure was real good.First time doing something other then jerky or snack sticks
Ketch22, are you by chance plug into an extention cord?
If not is the plug you are using share by other electonics that are being used at time of smoke.
Sounds like your Bradley is starving for electricity.
HI
No it was the only thing on that line.After I put up the post and before bring the meat into the house I put the smoker on the Auber dual probe.
then the temp came up .I set the PID at 228 and got the meats IT to 165*. But I still have to look at the wires in the Bradley.The Auber is nice but I am not got with the programing of thing like that.( like VCR's and DVD) I am going to send Bradley a email I hope they can help or know why it wont get up to temp.Do you think the heating element mite be bad I just got the smoker in Feb only used it three times.
If you hooked up the PID and got the temps to rise, it doesn't sound like the element.
Sounds like something wasn't pushed in good and tight, like partially plugged in.
Well I am glad you got to finish your smoke.
Hi
I am going to try it again today after I check all the wires. I have pic I just have to learn how to post them
Thanks for all the help
OK I checked all the wires and started the test with no meat just the brick no water and the smoke gen.on. Temp out side was 70*the wind did pick up around 1:00
Start Bradly st at Bradley read Maverick read fluke read
10:45 300* 67 67 67
11:15 300 214 233 230
11:45 300 234 243 240
12:15 move set up to 320
1:00 320 241 253 253
1:15 320 246 248 248
Now I have to ask this should I be able to raise the temp set point over 320* on the Bradley and
the timer set only go's up to 4hr
Ketch, you want stable temps.
The Bradley temp will stabilize over a long period of a cook.
But, it sounds like you MAY have a bad digital.
When you use your PID, it bypasses the digital control.
Try running a test and set your Bradley for a cooking range temp (225*)
and watch your maverick and fluke over that time period.
When you turn on the Bradley you will have to give it about an hour to get everything warm
which is why we all pre-heat our Bradley's.
Thanks classicrockgriller
I will try the test .I Guss I will have it email Bradley about the digital thing I hope they help me with that.
Thanks Again for the help
classicrockgriller
Her is the test no smoke gen
start Bradley set Bradley temp Marv temp fluke temp
500 pm 220 67 67 67 temp out side 67
508 " 126 150 164
515 " 171 189 192
530 " 216 210 213
600 " 214 213 198
630 " 212 217 219
Quote from: Ketch22 on March 21, 2010, 03:49:37 PM
classicrockgriller
Her is the test no smoke gen
start Bradley set Bradley temp Marv temp fluke temp
500 pm 220 67 67 67 temp out side 67
508 " 126 150 164
515 " 171 189 192
530 " 216 210 213
600 " 214 213 198
630 " 212 217 219
Ketch, it looks to me like it is all good.
I would still call Bradley on the Digital not being able to advance past 4 hrs.
You also need to learn that PID, that will save you alot of worries.
classicrockgriller
Thanks
Yes that test did go well.I sent a email to Bradley but i will call them in the morning I asked them to look at my post.I don't know if they will I hope so.
AS for the Pid I need to learn that but i am having a hard time with that.I emailed them and didn't get any help.You were a real big help Thanks a lot
Ketch
Quote from: Ketch22 on March 21, 2010, 04:27:43 PM
classicrockgriller
Thanks
Yes that test did go well.I sent a email to Bradley but i will call them in the morning I asked them to look at my post.I don't know if they will I hope so.
AS for the Pid I need to learn that but i am having a hard time with that.I emailed them and didn't get any help.You were a real big help Thanks a lot
Ketch
Have you seen the write up on the PID by Hawkeye Smokes in the recipe section?
I have a dual probe and IF I can help just let me know.
Thanks I will look it up sure need the help
HI crg
I emailed Brian and got the Time problem fix it turned out that it was me. Now working on the temp not getting to 320* or close to 250*
If I send a personal message will it be posted only to person I send it to or will every one get it.
Quote from: Ketch22 on March 23, 2010, 06:53:23 AM
If I send a personal message will it be posted only to person I send it to or will every one get it.
Just the recipient will see a PM. Any replies will be in the "My Messages" menu.
after 4 day cure
(http://i901.photobucket.com/albums/ac214/tophat511/034-1.jpg)
after the rub
(http://i901.photobucket.com/albums/ac214/tophat511/035.jpg)
after the smoke
(http://i901.photobucket.com/albums/ac214/tophat511/038.jpg)
ready to eat
(http://i901.photobucket.com/albums/ac214/tophat511/042.jpg)
On a roll with eggs
(http://i901.photobucket.com/albums/ac214/tophat511/043.jpg)
HI from Ketch22
Boy I do like this smoking thing going to get bigger The doc wont like that ::)
Looks good.
it looked fit to be tied.
Thank
HI it was my first after doing jerky and snack sticks.looks like it wont be my last