Guys, I'm replacing the sticky microswitch in my six rack tomorrow. Any tips/advice would be appreciated.
Tskeeter
Replacement on mine was pretty easy. The bigger issue though was that mine didn't need replacement. Bradley sent me a new one, and after i installed it I got the same problem I had been getting before...the dreaded runaway puck issue.
Turns out my real issue was that the danged arm that rotates and pushes the microswitch was off by just a tiny fraction of an inch. After messing with it I was able to move it far enough toward the micro-switch that it began depressing it properly and my problem was solved. I now have an extra micro switch sitting around.
It's all really easy in there...I think I was able to use one screwdriver for the whole thing.
There's a pic here the might help:
http://www.susanminor.org/forums/showthread.php?488-Answers-To-Bradley-Smoker-FAQ-s&p=988#post988 (http://www.susanminor.org/forums/showthread.php?488-Answers-To-Bradley-Smoker-FAQ-s&p=988#post988)
getting the adjustment right is the key