I just got a Bradley smoker. When cold smoking, how do I eliminate the "E1 beeping error", since the unit is too far away to plug the sensor in? Forgive me if I missed the answer in another post. I haven't come across this specific problem.
Hi St. Alfonzo;
Welcome to the forum.
If you are handy with a soldering iron, you can make a By-Pass Plug. The directions are included in the link below.
Bradley Digital By-Pass Plug (http://forum.bradleysmoker.com/index.php?topic=9164.msg97088#msg97088)
Or you can buy two 2.1mm x 5.5mm x 9.5mm DC Plugs, get the necessary length of wire the same gauge as your Bradley sensor, and solder a plug on each end of the wire. That way you can plug your homemade sensor wire into the generator to the cabinet.
Or if you are not handy with a soldering iron, you can also purchase the bypass plug directly from Bradley, by email, but in these days of the pandemic, that may take awhile.
Yard & Pool also sells the bypass plug.
Bradley Cold Smoke Adapter Bypass Plug (https://yardandpool.com/collections/bradley-smoker-parts/products/bradley-cold-smoke-adapter-by-pass-plug)
Thank you for the information. I think I can scrounge enough parts to make something work.