Photo Bucket problems

[bundy]

Sorry, but I can't seem to do the photo bucket thing, I have pics on it but can't get them to my post?
Is there any other way tp post pictures??

[Hoss]

Its gonna be the same thing with any site you use.

Just some things to test.

1. Open the album containing your photo.

2.  Float your mouse over the pic you wanna use.

3.  Click in the HTML box (should highlight it all).

4.  Use CTRL + C  to copy.

5.  Now, when you paste to your topic (use CTRL + V), it should look something like this.

[ img].http://www.photobucket.com/somerandomnumbers.[ /img]

Like I say, any photo hosting site you use is gonna have a very similar format.

[lumpy]

Did you try this

http://www.susanminor.org/forums/showpost.php?p=768&postcount=11

Lumpy

[bundy]

<a href="http://s801.photobucket.com/albums/yy297/bundy111/?action=view&current=SmokerVenting003.jpg" target="_blank"><img src="http://i801.photobucket.com/albums/yy297/bundy111/SmokerVenting003.jpg" border="0" alt="Photobucket"></a>

[bundy]

Well I didn't do it right but if you click on the highlite you can get the pic, I'll have to have my daughter in law come over and show me, I'm not the smartest walking on these computers!!
Thank you all for your help!

[classicrockgriller]

That vent looks like it should work, But I think you might have to move the dart board. ;D

[Tiny Tim]

There, I got it, 4th try though.

Here ya go, bundy

[bundy]

Thanks everybody! I need to figure that one out??
BDS seems to be working now with no smoke, I'm wondering if the in-line fan is slowing the draft down?

[MPTubbs]

I hope you got the fan pull'n and not push'n! :o

Just yank'n your chain......need a gap between the smoker and the vent.

[bundy]

I'm thinken, take it all out and run 4" all the way, but need to find a 4" damper, that and the summer is at 134* hope it gets to 150 soon otherwise won't BE ABLE to give it a bath!

[Hoss]

ok, bundy, you picked the html box.  Pick the [img] box and it will work fine.

edit:  I gave you worng directions on my first post.  sorry  :-\

[bundy]

MPT, what do you mean by a gap between the smoker and vent?? Do you have a pic?
Thanks

[MPTubbs]

MPT, what do you mean by a gap between the smoker and vent?? Do you have a pic?
Thanks

I would not seal the vent tube directly to the top of the smoker.

Raise the vent tube an inch or two away from the vent adjuster on top of your Bradley.

You might have to play with it a little (up or down) to get max drafting.

You do not want your fan to suck smoke and heat out of your smoker......you only want the fan to pull away what is coming OUT of the smoker.

Give it a try....what can it hurt! ;)

Looks like Tiny Tim has the same idea in your other post....Mod for indoor use.

[bundy]

Thanks, I mess around with it with the generator burning and try to see when it will draft.