Heat Differential

Started by thirtydaZe, October 11, 2010, 10:50:25 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 2 3
User actions

thirtydaZe

#30
October 21, 2010, 03:30:49 PM Last Edit: October 21, 2010, 06:04:51 PM by thirtydaZe
EDIT:  sorry, wrong thread I posted this in.

DBS 6 Rack
Auber PID 1202 Dual Probe
Yoder Cheyenne 16

GusRobin

#31
October 21, 2010, 05:24:40 PM
I'll bow to someone that has  BDS.
"It ain't worth missing someone from your past- there is a reason they didn't make it to your future."

"Life is tough, it is even tougher when you are stupid"

Don't curse the storm, learn to dance in the rain.

BuyLowSellHigh

#32
October 21, 2010, 05:43:58 PM
It won't matter what you set the oven temp to on the SG so long as plug the oven into the Auber.  IF the oven sensor is above what the oven set temp on the SG is, there just won't be any power to the empty socket for the oven on the back of the SG, which is not is use anyway.  However, IF the oven time runs to zero, the SG will shut itself of.  The SG side operates somewhat independently - you just need to have time on the oven side. Make sense?
I like animals, they taste good!

Visit the Recipe site here

Aether

#33
October 24, 2010, 07:17:48 AM
Even with the PID, you will not be able to maintain a stable temp in windy/cool conditions with just the stock Bradley heating element.  500 watts is just not enough power.  Add the 2nd element.  IMHO, this is a mandatory modification if you live in an area where temps drop below 40F.  I really wish that Bradley would change the DBS to a stock dual 500 element or a single 1000 watt element.
Print
Go Up Pages 1 2 3
User actions