pucks still not feeding

[mez]

so i replaced the micro switch that bradley sent me and they still dont feed.the pusher only comes back half way then returns.Anyone have a fix for this?

[beefmann]

sounds like the  pusher or linkage is catching on a burr  or binding, open the smoke generator and activate the pusher,,, seeing where it  stops  and what the  cause is.. maybe a  little bit  of filing  wile  help. also check if there any  loose  screws and everything is  running  straight  like it  should

[mez]

is there a way to run the puck advance without being connected to the smoker?

[Bradley (Head Office)]

Hi Mez

You will need the sensor cable plugged in to the tower or it will give you an E-1 error.

Try the suggestions Beefman gave you and also when the motor arm retracts half way back do you hear a clicking noise comming from the motor
this could be a sign of a stripped gear in the motor.

Brian.

[mez]

It does click and pop up a little then it returns half way back.It seems to be working a little better with 3 bubba pucks on top of the stack.I'm limping it through this jerky smoke then i'll take it apart.