pimp my Bradley day 4 DONE!

[DetroitSmoke]

Funny thing I was just thought of that very thing and was just about to post it.  The back will always be hotter weather on or off.  I thought it would be best also to keep the box temp even leave it on.  I will use the switch to shut if off when I open the door only.  Don't want all the smoke blowing in my face every time the door is opened.

[DetroitSmoke]

Detroit, what fan did you use and where did you get it?  Thanks!

For the inside I used a 3 1/2 inch fan.  It is rather large but is not "windy".  The blades are very close to the back wall so it cant get a good bite on the air.  I did have to cut the V tray to make it fit.  I also put it just low enough so I can still use the bottom rack

http://www.grainger.com/Grainger/wwg/search.shtml?searchQuery=2C951&op=search&Ntt=2C951&N=0&GlobalSearch=true&sst=subset

For the motor cooling fan I used

http://www.grainger.com/Grainger/wwg/search.shtml?searchQuery=2C948&op=search&Ntt=2C948&N=0&GlobalSearch=true&sst=subset

the motor used is

http://www.grainger.com/Grainger/wwg/search.shtml?searchQuery=4M079&op=search&Ntt=4M079&N=0&GlobalSearch=true&sst=subset

You will need a motor with a long shaft.  My inside fan just fit after bending the blades away a bit  from the back wall