• Welcome to BRADLEY SMOKER | "Taste the Great Outdoors".
 

100 degrees?

Started by tmo1138, July 04, 2013, 02:41:06 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tmo1138

Hey guys,

Question.. I found a recipe on another forum for smoked salmon that said to start smoking at 100 degrees.  But the lowest I can see the digital smoker going - even when only using the smoker unit and not turning the oven on at all - is 120 degrees.

Am I missing something here?

For reference: http://honest-food.net/2012/08/12/how-to-smoke-salmon-recipe/


Toker

You can get these low temp using a cold smoke adapter and a PID controller. Or just The pid and leaving the smoke generator off.

devo

You can start your process at the 120 F and it will be just fine. He actually got that recipe from this site.

tmo1138

Quote from: Toker on July 04, 2013, 04:38:42 PM
You can get these low temp using a cold smoke adapter and a PID controller. Or just The pid and leaving the smoke generator off.

PID controller?  Can you tell me more?


tmo1138

Quote from: devo on July 04, 2013, 05:00:30 PM
You can start your process at the 120 F and it will be just fine. He actually got that recipe from this site.

Thank you.  Glad to know I'm not screwing anything up.. :)


Toker

A PID controller is use to controll your element with more precision than the regular smoker temperature controller. Instead of plugging the cord for the element into the smoke generator, you plug it into your PID. Check there http://www.auberins.com/index.php?main_page=product_info&cPath=14_28&products_id=151

tmo1138

Quote from: Toker on July 04, 2013, 06:25:58 PM
A PID controller is use to controll your element with more precision than the regular smoker temperature controller. Instead of plugging the cord for the element into the smoke generator, you plug it into your PID. Check there http://www.auberins.com/index.php?main_page=product_info&cPath=14_28&products_id=151

That's pretty cool!  But I have the digital smoker...  Seems like this unit is better suited to the OBS.  This can be used for the Digitals, too?

Thanks again btw.. I love learning about this stuff..!!

devo

Yes a pid controller is used on both units. It will keep your temp + or -  a few degrees. Even with the digital model without a pid you will get large temp swings.