problem with my 4 rack digital smoker

Started by bronson9467, June 11, 2017, 02:26:12 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

bronson9467

so I have had my bradley for about 2 years now and it has been great but I tried using it yesterday and it kept bouncing from like 70 degrees to 150 simultaneously after about 40 minutes  of preheating. has anyone else had this issue and if so what is the cause and how do i fix it?

gricardsimplycol

I hear a lot of issues with digital.
I have the original . Turn ti high and let it do its work

Sent from my SM-G930V using Tapatalk


bronson9467

I did that and it was find but the box will say 153 then I look again and is says 70 the 5 minutes later it's at 113 then back to 153

Habanero Smoker

Hi bronson9467;

Welcome to the forum.

It sounds like there may be a problem with the sensor cord. Try unplugging and plugging back in again making sure the plug is tight. While it is off, check the ends of the cords for corrosion, and make sure there is not debris in the plugs and sockets. Also reversing the ends some times helps.

If that doesn't fix the problem contact Bradley, it could be your temperature sensor.



     I
         don't
                   inhale.
  ::)