DBS/Probe routing for Maverick ET-73

[Smoked]

OK, guys... Got a Maverick for Christmas for my DBS and was curious what the experts here have done regarding routing of the probe wires for the transmitter-- do you route them out the top vent, between the door and door seal, or what?   -and any creative locations to mount the transmitter itself?

Thanks in advance--

Ed

[Tiny Tim]

Run 'em where you want 'em...I have mine, along with the PID probe wire, through the door opening, between the seal and the cabinet.

[KyNola]

I'm with Tim.  Run 'em where you feel good.  My meat temp probe is most likely always through the door.  The box temp probe may be coming through the vent if I have it higher in the box.  The transmitter itself I hang on the puck tube.

KyNola

[Gizmo]

I started out going through the vent but found it to be a bit of a hastle when rotating racks or pulling racks.  It also takes longer to connect which means the door is open longer and loosing temp.  I just let the wires go between the door and seal and have never had smoke leak out from the wires.  Quick and easy.