New in Cali

[phread]

 :-\
PLEASE help me.
I used the smoker twice. Its broken- E messages to Not turning on- CANT get ANYONE to help at Bradley.  Can someone tell me what to do??

[Shasta bob]

Check the plug in on the back of the unit

[phread]

I did-
When I plug it in- everything lights up for a sec- then NOTHING.

Thank you for trying!!

[Shasta bob]

are you tripping the gfci?

[watchdog56]

You might have a loose wire in the smoke generator. Take off the outside screws only from the smoke generator and make sure your connections are tight.

[NePaSmoKer]

Try here.

http://www.bradleysmoker.com/qanda.asp#4

[Fernslinger]

Mine does that too. It is normal. Are you then turning the smoke generator and/or the heating element on? There are On buttons on the front panel for each :)

[mrsipi]

Hi Cali
I'm a newbe from Illinois.
I bought a Bradley Digital smoker at a sale dirt cheap with the same problems.
I found that the E1 error was the temp sensor inside the smoker-I took the back off and when I pulled slightly on 1 of the 2 black wires to it the E1 error would go away and the unit would then work. For $4.99 I replaced it and now is working fine.

[beefmann]

sounds like you may have a bad connection . or bad tc , i would contact Brian at bradley