Replacement

[banditdfw]

I have a 6 rack digital smoker and when I turn the smoker on, it will continuously feed the bisquetts until they are gone.  I suspect I may need a new circuit board.  Does anyone know where I can get one?

[Keymaster]

Could be just the micro switch is stuck closed, take the smoke generator apart and clean it up. Theres a thread somewhere on here how to do it

Sent from my VM670 using Tapatalk

[Habanero Smoker]

Hi banditdfw;

Welcome to the forum. It does sound like a micro switch problem. The following link may help.

Bisquettes Continuously Feeding.....

Here are more tips and trouble shooting ideas:

Bradley FAQ's

[mikecorn.1]

Had the same problem a while back. My problem was the micro switch.


Sent from my iPhone using Tapatalk

[banditdfw]

Thanks for the tips.  I just cleaned out the drive unit a while back because the pucks were sticking and I was getting an error indication.  I cleaned it out and it worked for a while.  I will crack it open again and look at the microswitch.

Thanks again.

[viper125]

Watch the button too! Every once in awhile my advance button sticks and does the same thing.