sausage stuffer question

hybridcx · February 24, 2012, 05:37:08 PM

are there any other pictures needed? for seeing about making one of these bad boys?

Sam3 · February 27, 2012, 03:13:20 AM

This is from my LEM 1112.

It's 2 1/8"

The LEM 19mm tube is on backorder.

If anyone can make something for 19mm and 17mm casings, I would be more than happy to pay for them.

pikeman_95 · February 27, 2012, 06:27:11 AM

Sam3
I have the stainless 7/16 tube I just need to find the stainless flange material and I can silver solder them together. If I am correct you will need a 2 1/8 inch flange on your stuffer?
Kirby.
It looks like rick needs his flange to be 1 1/2 inch
Kirby

hybridcx · February 27, 2012, 08:03:06 AM

I am in for one for the 5 pound LEM stuffer as well( same one Rick posted)....

Sam3 · February 27, 2012, 08:26:47 AM

Quote from: pikeman_95 on February 27, 2012, 06:27:11 AM
Sam3
I have the stainless 7/16 tube I just need to find the stainless flange material and I can silver solder them together. If I am correct you will need a 2 1/8 inch flange on your stuffer?
Kirby.
It looks like rick needs his flange to be 1 1/2 inch
Kirby

Yes, 2 1/8" is my flange Kirby.
I would definitely want one!

pikeman_95 · February 29, 2012, 05:14:31 PM

Quote from: hybridcx on February 24, 2012, 05:37:08 PM
are there any other pictures needed? for seeing about making one of these bad boys?

Sam
I found some stainless fender washers that I can drill out to 7/16 ID and silver solder them to the 7/16 thin walled tube that I have. I would use the washers to make the flange. The stainless washers are 2 inches OD and you say your flange is 2 +1/8 inches. Will having a1/16 difference all around the edge make a difference. I am going to guess it will still work for you. It is not possible to just get any size of washers that you want. You just have to settle for what you get when it comes to stainless. I also found some washers that are 1 1/2 inches OD that I can also silver solder to the tubes. I also have some 3/8 stainless thin walled stainless tube that I could make for stuffeing 13MM casings. If anyone is interested in these let me know.
Kirby

hybridcx · February 29, 2012, 05:51:20 PM

I will deff take the 1.5" flange, on the tube that will stuff 17mm casings... let me know how much and where to send payment ect.

thank you

pikeman_95 · February 29, 2012, 06:07:17 PM

I will send you a PM and we can discuss this.
Kirby

hybridcx · February 29, 2012, 08:56:15 PM

thanks ill look for it

Sam3 · March 01, 2012, 03:19:33 AM

Quote from: pikeman_95 on February 29, 2012, 05:14:31 PM
Quote from: hybridcx on February 24, 2012, 05:37:08 PM
are there any other pictures needed? for seeing about making one of these bad boys?
Sam
I found some stainless fender washers that I can drill out to 7/16 ID and silver solder them to the 7/16 thin walled tube that I have. I would use the washers to make the flange. The stainless washers are 2 inches OD and you say your flange is 2 +1/8 inches. Will having a1/16 difference all around the edge make a difference. I am going to guess it will still work for you. It is not possible to just get any size of washers that you want. You just have to settle for what you get when it comes to stainless. I also found some washers that are 1 1/2 inches OD that I can also silver solder to the tubes. I also have some 3/8 stainless thin walled stainless tube that I could make for stuffeing 13MM casings. If anyone is interested in these let me know.
Kirby

Kirby, I found one. Thanks for your help though!