About the bubba pucks

[BC Smoker]

Kinda thinking out loud here, living in the lower mainland and I'm looking for a source for bubba pucks what came to mind was ..... Using the outer ring of a bearing or a " race / rine ". They are stainless and with any luck inexpensive / free ?. Hey wait I might be on to some'n here. I'm going to go a local bearing shop .... I'll keep ya posted.¯\_(ツ)_/¯

[Saber 4]

If you have access to a band saw, stop by a muffler shop and pick up a scrap piece of new muffler pipe in the correct diameter and cut them on the band saw, I've been using a set for about a year now with no trouble and they were free.

[Lefty_Smoker]

Is it worth the trouble when they are only $15 on ebay?

[Jim O]

$15 x 3 = $45 - a piece of scrap tailpipe shouldn't cost that !

[waycoolcat]

I got 3 at Auberins.com for $21.50.
http://www.auberins.com/index.php?main_page=product_info&products_id=111

[Fireguy06]

I used a aluminum pipe coupling and cut it down works great

[TedEbear]

Someone else in another thread made some out of compressed aluminum foil.

Quick and Dirty Puck Savers